Rechercher

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 12062-2:1997. 1 Scope 1.1 General This part of ISO/IEC ISP 12062 covers the interchange of messages between Interpersonal Messaging (IPM) User Agents (UAs) (see also figure 1). These specifications form part of the Interpersonal Messaging application functions, as defined in the parts of ISO/IEC ISP 12062…

This National Standard of Canada is based on International Standard CEI/IEC 491:1984. 1. Scope 1.1 This standard applies to the following electronic flash apparatus for photographic purposes, having a stored energy not exceeding 2 000 J, together with associated apparatus and not intended to be subjected to dripping or splashing: - apparatus of the single-flash type which can have more than…

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10612-9:1995. 1 Scope 1.1 General ISO/IEC ISP 10612 is applicable to interworking units concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI base standards that collectively provide a MAC relay function between LAN subnetworks. This part…

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10609-47:1995. 1 Scope 1.1 General ISO/IEC ISP 10609 is applicable to end systems concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI standards, which collectively provide the connection-mode Transport Service using the connection-mode…

This National Standard of Canada is equivalent to International Standard ISO/IEC 10373-7:2008. 1 Scope ISO/IEC 10373 defines test methods for characteristics of identification cards according to the definition given in ISO/IEC 7810. Each test method is cross-referenced to one or more base standards, which may be ISO/IEC 7810 or one or more of the supplementary standards that define the…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-4-34:2005. 1 Scope This part of IEC 61000 defines the immunity test methods and range of preferred test levels for electrical and electronic equipment connected to low-voltage power supply networks for voltage dips, short interruptions, and voltage variations. This standard applies to electrical and…

This National Standard of Canada is equivalent to International Standard ISO/IEC 8602:1995. 1 Scope This Recommendation | International Standard specifies a) procedures for the connectionless-mode transmission of data and protocol control information from one transport entity to one peer transport entity; b) the encoding of the transport-protocol-data-…

This National Standard of Canada establishes a classification system and specifies physical property requirements. Test methods to determine the properties for each class of polyethylene sheet material are specified. This document covers a material intended to be used in building construction applications, that may be used above grade or in contact with the ground. The material can provide the…

1.1 This Standard applies to Class A, single- and three-phase, ground-fault circuit-interrupters intended for protection of personnel, for use only in grounded neutral systems in accordance with the National Electrical Code (NEC), ANSI/NFPA 70, the Canadian Electrical Code, Part I, and Electrical Installations (Use), NOM-001-SEDE. These devices are intended for use on alternating current (AC)…

1 Scope This National Standard of Canada applies to automotive fuel composed of 50 to 85% by volume denatured fuel ethanol and gasoline strictly for use in flexible fuel vehicles over a wide range of climatic conditions. Fuel produced to this standard is not for use in conventional vehicles designed to operate on gasoline containing up to 10% by volume ethanol. Precautions for the use of…