Rechercher

1.1 Scope 1.1.1 This standard applies to newly produced vented gas-fired space heating appliances (see PartXIV, Definitions), hereinafter referred to as appliance(s), constructed entirely of new, unused parts and materials, and having input ratings up to and including 400,000 Btu per hour. These appliances are: a. For use with natural gas; b. For use with manufactured gas; c. For use…

1 Scope 1.1 This standard applies to enclosures for electrical equipment intended to be installed and used in nonhazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico's Electrical Installations, NOM-001- SEDE, as follows: a) Enclosures for indoor locations, Types 1, 2…

1.1 This standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico’s Electrical Installations, NOM-001-SEDE, as follows: a) Enclosures for indoor locations, Types 1, 2, 5, 12, 12K,…

1 Scope 1.1 This standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico's Electrical Installations, NOM-001-SEDE, as follows: a) Enclosures for indoor locations, Types 1, 2,…

1.1 The requirements of this Standard cover the design and construction of Type B (round or oval) and Type BW Gas Vents. 1.2 Type B Gas Vents are intended for the venting of flue gases having temperatures not exceeding 245 °C, from gas fired appliances certified with draft hoods or diverters. Type B Gas Vents are also intended for use with gas fired appliances, without draft hoods or…

This National Standard of Canada is equivalent to International Standard ISO/IEC 18000-7:2009. 1 Scope This part of ISO/IEC 18000 defines the air interface for radio frequency identification (RFID) devices operating as an active RF tag in the 433 MHz band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO technical…

This National Standard of Canada is equivalent to International Standard ISO/IEC 18000-7:2008. 1 Scope This part of ISO/IEC 18000 defines the air interface for radio frequency identification (RFID) devices operating as an active RF tag in the 433 MHz band used in item management applications. The purpose of this part of ISO/IEC 18000 is to provide a common technical specification for RFID…

This National Standard of Canada is equivalent to International Standard ISO/IEC TR 14471:2007. 1 Scope Since CASE adoption is a subject of the broader technology transition problem, this Technical Report addresses the adoption practices appropriate for a wide range of computing organisations. This Technical Report neither dictates nor advocates particular development standards, software…

This National Standard of Canada is based on International Standard ISO 5356-1:2004. 1 Scope This part of ISO 5356 specifies dimensional and gauging requirements for cones and sockets intended for connecting anaesthetic and respiratory equipment, e.g. in breathing systems, anaesthetic-gas scavenging systems and vaporizers. This part of ISO 5356 gives requirements for the following…

This National Standard of Canada is based on International Standard CEI/IEC 61400-2:2006. 1 Scope This part of IEC 61400 deals with safety philosophy, quality assurance, and engineering integrity and specifies requirements for the safety of Small Wind Turbines (SWTs) including design, installation, maintenance and operation under specified external conditions. Its purpose is to provide the…