Rechercher

This National Standard of canada is based on International Standard CEI/IEC 1089:1991 (first edition, 1991-05). 1 Scope [Replace this clause with the following] 1.1 This Standard specifies the electrical and mechanical characteristics of round wire concentric lay overhead electrical stranded conductors made of combinations of any of the following metal wires: (a) aluminum wires: (i)…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61482-1-1:2009. This part of CAN/ULC-61482 specifies test methods to measure the arc thermal performance value of materials intended for use in heat- and flame-resistant clothing for workers exposed to the thermal effects of electric arcs and the function of garments using these materials. These test methods…

This National Standard of Canada is equivalent to International Standard ISO 15883-2:2006. 1 Scope This part of ISO 15883 specifies particular requirements for washer-disinfectors (WD) that are intended for use for the cleaning and thermal disinfection, in a single operating cycle, of re-usable medical devices such as surgical instruments, anaesthetic equipment, bowls, dishes and receivers,…

This National Standard of Canada is equivalent to International Standard ISO/IEC TR 24750:2007. 1 Scope This Technical Report - specifies the transmission performance for channels to support 10GBASE-T, - specifies the methods to assess whether installed Class E and Class F channels meet 10GBASE-T requirements, - provides mitigation techniques to improve the performance of an existing…

This National Standard of Canada is based on International Standard ISO 8835-3:2007. * 1 Scope This part of ISO 8835 specifies requirements for transfer and receiving systems of active anaesthetic gas scavenging systems (active AGSSs) intended to reduce exposure of healthcare personnel to anaesthetic gases and vapours while providing patient protection (e.g. against excessive flow and pressure…

1 Scope 1.1 This Standard applies to grounding and bonding equipment for use in accordance with the Canadian Electrical Code, Part I, CSA C22.1, in Canada or the National Electrical Code, NFPA 70, in the United States. 1.2 This Standard applies to the following grounding and bonding equipment: (a) ground clamps, bonding devices, grounding bushings, water-meter shunts, grounding electrodes, and…

This National Standard of Canada is equivalent to International Standard ISO/IEC 7816-4:2005. 1 Scope This part of ISO/IEC 7816 specifies - contents of command-response pairs exchanged at the interface, - means of retrieval of data elements and data objects in the card, - structures and contents of historical bytes to describe operating characteristics of the card, - structures for…

This National Standard of canada is equivalet to International Standard ISO/IEC 14165-222:2005. 1 Scope This part of ISO/IEC 14165 describes a communication interface between a channel and I/O control units that utilize the Single-Byte Command Code Sets (SBCCS) as implemented in a wide range of data processing systems. It employs information formats and signalling protocols that provide a…

This National Standard of Canada is based on International Standard ISO 8835-4:2004. 1 Scope IEC 60601-1:1988, Clause 1 applies except as follows. Addition: This part of ISO 8835 specifies particular requirements for the essential performance of anaesthetic vapour delivery devices (AVDDs), as defined in 3.1. This part of ISO 8835 is applicable to AVDDs which are a component of an anaesthetic…

This National Standard of Canada is equivalent to International Standard ISO/IEC 15963:2004. 1 Scope ISO/IEC 15963 describes numbering systems that are available for the identification of RF tags. A unique ID is required as part of the write operation to RFID tags. The unique ID guarantees that the information written to a tag is unambiguously written to the correct data carrier (tag). A…