Rechercher

1.1 Application This Standard applies to single- and multi-section buildings supported on longitudinal floor beams, or perimeter rim joists designed to perform as beams. 1.2 Issues addressed This Standard specifies requirements for the following aspects of building installation: a) site preparation; b) permanent foundations; c) anchorage to resist overturning and pier toppling due to wind…

The International Standard ISO 9712:2005 is adopted without modifications (IDT) as a CGSB Standard CAN/CGSB-48.9712-2006/ISO 9712:2005 and has been approved as a National Standard of Canada by the Standards Council of Canada. 1 Scope This International Standard specifies the qualification and certification of personnel involved in non-destructive testing (NDT). It is applicable to…

1. SCOPE 1.1 These requirements cover single and double wall cylindrical steel tanks of the horizontal, non-pressure type that are used for the underground storage of Flammable Liquids and Combustible Liquids, such as gasoline, fuel oil, or similar products. 1.2 Part A of these requirements cover single wall tanks. 1.3 Part B of these requirements cover double wall tanks with provision for…

1. SCOPE 1.1 These requirements cover single and double wall cylindrical steel tanks of the horizontal, non-pressure type that are used for the underground storage of flammable liquids and combustible liquids such as gasoline, fuel oil, or similar products. 1.2 Part A of these requirements cover single wall tanks. 1.3 Part B of these requirements cover double wall tanks with…

This National Standard of Canada is equivalent to International Standard ISO/IEC 8484:2007. Scope This International Standard specifies the characteristics and location of a magnetic stripe on a savingsbook as defined in Clause 4 and the use of such savingsbooks for international interchange. Compatibility with international interchange systems is provided through the requirements of this…

This National Standard of Canada is based on International Standard CEI/IEC 60079-0:1998+A1:2000 (edition 3.1, 2000-06). 1 Scope This part of IEC 60079 specifies the general requirements for construction, testing and marking of electrical apparatus, Ex cable entries and Ex components, intended for use in potentially explosive atmospheres of gas, vapour and mist. This standard does not…

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC 9646-3:1992. 1 Scope This part of ISO/IEC 9646 defines an informal test notation, called the Tree and Tabular Combined Notation…

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC 11756:1992. Part 1: MUMPS Language Specification Introduction Part 1 consists of two sections that describe the MUMPS…

This National Standard of Canada specifies the manufacturing, performance and labelling requirements for remanufactured toner cartridges for monochrome laser print devices, including but not limited to printers, multifunction devices, copiers and facsimile (fax) machines. NOTE Some cartridges, because of their original OEM design and construction, may be more suitable than others for…

This National Standard of Canada is equivalent to International Standard ISO/IEC 15946-1:2008. 1 Scope ISO/IEC 15946 specifies public-key cryptographic techniques based on elliptic curves. These include the establishment of keys for secret-key systems, and digital signature mechanisms. This part of ISO/IEC 15946 describes the mathematical background and general techniques necessary for…