Rechercher

Basis for this method is the laboratory sample obtained by the method specified in ISO 948. The principle of determination consists in grinding the laboratory sample, which has been previously mixed, to obtain particles of the size specified in the International Standard appropriate to the spice or condiment concerned or, if not so specified, to obtain particles of size approximately 1 mm.

ISO 10121-2:2013 aims to provide an objective test method to estimate the performance of any full size gas filtration device (GPACD) for general filtration regardless of media or technique used in the device. In fact, the goal of this part of ISO 10121 is to avoid relating the test data to internal parameters altogether. The benefit with this approach is that customers of GPACDs will be able to…

This International Standard specifies requirements for safety footwear for users of handheld chain saws. It also specifies requirements for footwear for users of handheld chain saws equipped with customized insocks, customized footwear with resistance to chain saw cutting or individual manufactured customized footwear with resistance to chain saw…

Scope of the proposed deliverable This document focuses on recommended condition monitoring techniques for detecting and diagnosing developing machine faults associated with the most common potential failure modes for reciprocating compressors. It is intended to improve the reliability of implementing an effective condition monitoring approach for the compressors. It is also intended to help…

This International Standard specifies test specimens and procedures for fatigue testing at ambient conditions, under repeated tensile loading, generating cross-tension loading to the bonded plates of carbon fibre reinforced plastics (CFRPs) to metal assemblies. The specimen undergoes cyclically stress, comprising an alternating stress on a static stress which represents the mean stress. This…

This International Standard specifies a method, based upon linear elastic fracture mechanics (LEFM), for the determination of mode I fracture toughness of structural adhesive joints at high loading rates. It determines mode I fracture toughness by testing at high loading rates using double cantilever beam (DCB) specimens of the same or dissimilar materials bonded by adhesive. Wedges are inserted…

ISO 5364:2016 specifies requirements for oropharyngeal airways of plastics materials and/or rubber, including those with a reinforcement insert made of plastics materials and/or metal. ISO 5364:2016 is not applicable to metal oropharyngeal airways, nor to requirements concerning flammability of oropharyngeal airways. Flammability of oropharyngeal airways, for example, if flammable anaesthetics,…

This first edition as an International Standard constitues a technical revision of ISO Recommendation R 657-1:1968. ISO 657 consists of 21 parts integrating any shapes of sections. ISO 657-1 specifies dimensions of hot-rolled equal-leg angles.

The scope of this proposed standard is to provide the information and the guidance needed to carry out the testing activity of liquid hydrogen valve such as ball valve, butterfly valve, check valve, globe valve, gate valve etc. with reference to current hydrogen technology and applicable international recognized standards as well as international shipping regulations. This standard is based on…

Creation of a series of international standards for electric road system for BEVs Specify how roadside feeding electric road system can be integrated in a sustainable mobility and transportation: - Defining role architecture of electric road system with dynamic charging capability - Part 2 (This part): service and operational concept - Part 3 (Future part): system components