Metallic materials — Brinell hardness test — Part 1: Test method
ISO 6506-1:2014 specifies the method for the Brinell hardness test for metallic materials. It is applicable to both fixed location and portable hardness testing machines.
For some specific materials and/or products, particular International Standards exist (e.g. ISO 4498) and make reference to this International Standard.
Acoustics — Measurement of sound absorption properties of road surfaces in situ — Part 2: Spot metho...
ISO 13472-2:2010 specifies a test method for measuring in situ the sound absorption coefficient of road surfaces for the one-third-octave-band frequencies ranging from 250 Hz to 1 600 Hz under normal incidence conditions. For special purposes, the frequency range can be changed by modifying the dimensions of the system.
The test method is intended for: a) determination of the sound absorption…
This International Standard specifies the characteristics of laminate floor coverings, supplied in either tile or plank form. To encourage the consumer to make an informed choice, the standard includes a classification system (see ISO 10874) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking and packaging…
Gas analysis — Comparison methods for determining and checking the composition of calibration gas mi...
This International Standard provides methods for
_ determining the composition of a calibration gas mixture by comparison with appropriate reference gas
mixtures,
_ calculating the uncertainty of the composition of a calibration gas mixture in relation to the known uncertainty of
the composition of the reference gas mixtures with which it was compared,
_ checking the composition attributed to a…
This document gives the safety requirements and measures for stationary:
— cold presses;
— hot presses;
— bending presses;
— edge/face gluing presses;
— membrane presses;
— embossing presses;
where the pressing force is applied by hydraulic actuators pushing two flat or shaped surfaces against each other, capable of continuous production use, hereinafter referred to as "machines".
It…
Cranes — Proof of competence of steel structures — Part 1: General
ISO 20332-1:2008 sets forth general conditions, requirements, methods and parameter values for performing proof-of-competence determinations of the steel structures of cranes based upon the limit state method. It is intended to be used together with the loads and load combinations of the applicable parts of ISO 8686.
ISO 20332-1:2008 is general and covers cranes of all types. Other International…
Adhesives — Test methods for the selection of adhesives for indoor wood products
ISO 26842:2008 gives guidelines for the selection, by means of durability tests, of adhesives for use in wood products placed in indoor environments.
A series of exposure cycles at various temperatures and humidities is provided to verify that the adhesive selected, or a product bonded with the adhesive, meets the necessary durability requirements.
This International Standard is intended to help…
This International Standard specifies requirements for dried ginger (Zingiber officinale Roscoe) in whole/pieces and ground forms.
Annex A specifies a method for the determination of calcium.
Recommendations for storage and transport conditions are given in Annex B.
Thermal performance of windows, doors and shading devices — Detailed calculations
This International Standard specifies detailed calculation procedures for determining the thermal and optical transmission properties (e.g., thermal transmittance, total solar energy transmittance) of window, door and clear window (BIPV) systems based on the most up-to-date algorithms and methods, and the relevant solar and thermal properties of all components.
Products covered by this…
