Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 218: ...
Gives the requirements for one type of heat-shrinkable polyolefin sleeving with a temperature index of 135 and a nominal shrink ratio of 3:1. This sleeving is not flame retarded. It is normally supplied with internal diameter up to 39 mm and the standard colour is transparent.
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: ...
Gives the requirements for one type of heat-shrinkable, flame retarded, fluid resistant, elastomer sleeving with temperature index of 120 and a nominal shrink ratio of 2:1. This sleeving is normally supplied with internal diameter up to 102 mm and the standard colour is black.
This is a searchable PDF.
1.1 Scope and References
1.1.1 This standard applies to packaged, self-contained or factory matched packages of integrated systems (see 1.2.1) fuel cell power plants, hereinafter referred to as power plant(s), which, through electrochemical reactions and other processes, generate alternating-current electricity.
1.1.2 This standard applies to power…
Luminaires - Part 2: Particular Requirements - Section 3: Luminaires for Road and Street Lighting
This National Standard of Canada is based on International Standard CEI/IEC 598-2-3: 1993 (second edition, 1993-04), including Amendment 1:1997, and 2:2000.
Note - Amendment No. 2 reaffirmed 2007-03-28.
Scope
This Standard specifies requirements for luminaires for road and street lighting for use with tungsten filament, tubular fluorescent, and other discharge lamps designed to be…
This National Standard of Canada is based on International Standard IEC 60598-2-4:1997
Scope
This section of Part 2 of IEC Publication 60598 specifies requirements for
portable general purpose luminaires, other than handlamps, for use with
tungsten filament, tubular fluorescent and other discharge lamps on supply
voltages not exceeding 120 V. It is to be read in conjunction with those
sections…
Safety Specifications for Incandescent Lamps - Part 2: Tungsten halogen lampsfor domestic and simila...
This National Standard of Canada is based on International Standard IEC 432-2:1994.
1.1 Scope
This part of IEC 432 specifies the safety and the related interchangeability
requirements of tungsten halogen lamps for general lighting service. It covers
those tungsten halogen lamps that are used as direct replacements for
conventional tungsten filament lamps as well as new tungsten halogen…
Ballasts for tubular fluorescent lamps - General and safety requirements
This National Standard of Canada is based on International Standard CEI/IEC 920:1990
1. Scope
This standard covers ballasts, excluding resistance types, for use on a.c.
supplies up to 1 000 V at 50 Hz or 60 Hz, associated with tubular fluorescent
lamps with or without pre-heated cathodes operated with or without a starter or
starting device and having rated wattages, dimensions and…
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: ...
Gives the requirements for one type of heat-shrinkable, flame retarded, fluid resistant, polvinylidene fluoride sleeving with a temperature index of 175 and a nominal shrink ratio of 2:1. This sleeving is normally supplied with internal diameter up to 25,4 mm and the standard colour is transparent.
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 217: ...
Gives the requirements for one type of heat-shrinkable, flame retarded polyolefin sleeving with a temperature index of 135 and a nominal shrink ratio of 3:1. It is normally supplied with internal diameter up to 39 mm and in the following standard colours: black, brown, red, yellow, green, blue, orange, violet, grey and white.