Safety of power transformers, power supply units and similar - Part 2: Particular requirements for s...
This National Standard of Canada is equivalent to International Standard CEI/IEC 61558-2-1:1997 (first edition 1997-02).
1 Scope
Replacement:
This part 2 of IEC 61558 applies to stationary or portable, single-phase or polyphase, aircooled separating transformers, associated or not, having a rated supply voltage not exceeding 1000 V a.c., a rated frequency not exceeding 500 Hz, and a…
Safety of power transformers, power supply units and similar - Part 2-2: Particular requirements for...
This National Standard of Canada is equivalent to International Standard CEI/IEC 61558-2-2:1997 (first edition, 1997-10).
1 Scope
Replacement:
This part 2-2 of IEC 61558 applies to stationary or portable, single-phase or poly-phases, aircooled control transformers associated or otherwise having a rated supply voltage not exceeding 1 000 V a.c. or 1 415 V ripple free d.c. and rated…
Safety of power transformers, power supply units and similar - Part 2: Particular requirements for i...
This National Standard of Canada is equivalent to International Standard CEI/IEC 61558-2-4:1997 (first edition, 1997-02).
1 Scope
Replacement:
This part 2 of IEC 61558 applies to stationary or portable, single-phase or polyphase, air-cooled isolating transformers, associated or otherwise, having a rated supply voltage not exceeding 1000 V a.c. and rated frequency not exceeding 500 Hz,…
Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 2: Endurance tes...
This National Standard of Canada is equivalent to International Standard CEI/IEC/TS 60871-2:1999 (second edition, 1999-06).
1.1 Scope and object
This technical specification applies to capacitors according to IEC 60871-1 and gives the requirements for overvoltage cycling and ageing tests of these capacitors.
Gas analysis — Preparation of calibration gas mixtures — Static volumetric method
ISO 6144:2003 specifies a method for the preparation of calibration gas mixtures by a static volumetric method and provides a procedure for calculating the volumetric composition of the mixture. It can be used either with binary gas mixtures (containing one calibration component in a complementary gas, which is usually nitrogen or air) or with mixtures containing more than one component in the…
ISO 8977:2002 lays down the basic dimensions and tolerances in millimetres for headless and headed matrixes, in the outside diameter range of 5 mm to 50 mm.
It gives examples of material and hardness, and specifies a designation for matrixes that meet the requirements of this International Standard.
Matrixes in accordance with ISO 8977:2002 are adapted in their dimensions and tolerances to meet…
ISO 2303 specifies, for general purpose non-oil-extended, solution-polymerized rubbers (IR):
physical and chemical tests on raw rubbers;standard materials, standard test formulation, equipment and processing methods for evaluating the vulcanization characteristics.
Two mill-mixing procedures are described in this Internatioanl Standard and an internal mixer-mill mixing procedure is described in…
Guidelines for Quality and/or Environmental Management Systems Auditing
This National Standard of Canada is equivalent to International Standard ISO 19011:2002 (first edition, 2002-10-01).
1 Scope
This International Standard provides guidance on the principles of auditing, managing audit programmes, conducting quality management system audits and environmental management system audits, as well as guidance on the competence of quality and environmental management…
1 Scope
This Special Publication provides a summary of terms found in voluntary international, national, and CSA environmental standards. Two sets of terms are provided, as derived from international standards and from national and CSA standards. The source of each term is provided in parentheses following its definition.
This International Standard comprises maximum lamp outlines for incadescent lamps (including tungsten-halogen lamps). This consolidated version of IEC 60630 is based on the second edition (1994) and its amendments 1 (1997), 2 (1998), 3 (1999) and 4 (2002). It bears the edition number 2.4.