Rechercher

International Standard ISO 10110 applies to the presentation of design and functional requirements for optical elements and assemblies in technical drawings used for manufacturing and inspection. ISO 10110-14:2003 provides rules for the indication of the allowable deformation of a wavefront transmitted through or, in the case of reflective optics, reflected from an optical element or assembly.…

ISO 15384:2003 specifies methods of test and minimum performance requirements for protective clothing to be worn in wildland firefighting and associated activities. This clothing is not intended to provide protection during fire entrapment. ISO 15384:2003 applies to the general design of the garment, the minimum level of performance for the materials employed and the methods of test to determine…

This National Standard of Canada is based on International Standard CEI/IEC 60065:2001 (seventh edition, 2001-12). 1.1 Scope 1.1.1 This International Safety Standard applies to electronic apparatus designed to be fed from the MAINS, from a SUPPLY APPARATUS, from batteries or from REMOTE POWER FEEDING and intended for reception, generation, recording or reproduction…

This National Standard of Canada is based on International Standard IEC 60950-1; and is joint with UL 60950-1. 1.1 Scope 1.1.1 Equipment covered by this standard This standard is applicable to mains-powered or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V and designed to be…

This National Standard of Canada is based on International Standard CEI/IEC 60335-1:2001, fourth edition, 2001-05. 1 Scope The object of this Part 1 Standard is to specify general electrical safety requirements for certain products. The requirements of this Standard apply to a specific end-use product when it is explicitly referred to by that product standard. Each individual product…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-12:03 (second edition, 2001-10). 1 Scope and object This clause of the General Standard applies, except as follows: 1.1 Scope Addition: This Particular Standard specifies the safety requirements for VENTILATORS, as defined in 2.1.125, intended for use in critical care settings. Continuous positive airway…

This National Standard of Canada is based on International Standard ISO 10079-1:1999 (second edition, 1999-08-15). 1 Scope This part of ISO 10079 specifies minimum safety and performance requirements for medical and surgical suction equipment (see Figure 1) for health care facilities such as hospitals, for domiciliary care of patients and for field and transport use. Although such equipment…

This International Standard presents an illustrated vocabulary of the most common ancillary devices placed before, between and after dyeing and finishing machines. The terms thus defined are placed under the following headings: 1          Feeding of material 2          Guiding of material 3          Control of speed of material 4          Accumulation of material 5          Treatment of material…

The limits and methods of measurement laid down in this International Standard apply to industrial, scientific and medical (ISM) equipment, and to electro-discharge machining (EDM) and arc welding equipment. Procedures are given for the measurement of radio-frequency disturbances and limits are laid down within the frequency range 9 kHz to 400 GHz. Requirements for ISM lighting apparatus…

ISO/IEC 15431:2003 specifies the signalling protocol for the support of the Wireless terminal call handling additional network features (ANF-WTMI and ANF-WTMO) at the Q reference point between Private Integrated services Network eXchanges (PINX) connected together within a Private Integrated Services Network (PISN). ANF-WTMI is a feature that directs incoming calls to a WTMI user within the PISN…