Rechercher

ISO/IEC 21992:2003(E) specifies functions for using a packet network that uses the Internet Protocol (IP) as its network layer protocol and UDP and TCP as its transport layer protocols, to interconnect two Private Integrated services Network eXchanges (PINXs) forming part of a Private Integrated Services Network (PISN). Interconnection is achieved by carrying the inter-PINX signalling protocol…

ISO/TS 4949:2003 sets out rules for the designation of internationally standardized steel grades by means of symbolic letters and numbers to express application and principal characteristics (e.g. mechanical, physical, chemical) so as to provide an abbreviated identification of steel grades.

ISO/IEC 21992:2003(E) specifies functions for using a packet network that uses the Internet Protocol (IP) as its network layer protocol and UDP and TCP as its transport layer protocols, to interconnect two Private Integrated services Network eXchanges (PINXs) forming part of a Private Integrated Services Network (PISN). Interconnection is achieved by carrying the inter-PINX signalling protocol…

This International Standard defines the test methods used to measure power consumption of information technology equipment (ITE) under various modes of operation for the purpose of energy management. ITE includes the products identified in the scope of IEC 60950-1.

ISO/TS 17263:2003 establishes an AEI-System based on radio frequency technologies. This system is intended for general application in RTTT/TICS. It allows for the transfer of the identification codes and further information about equipment and vehicles used in intermodal transport into such RTTT/TICS and information systems related to Intermodal Transport processes. Within the intermodal context…

ISO 8320-1:2003 identifies and defines terms applicable to the physical, chemical and optical properties of contact lenses, their manufacture and uses. It provides a vocabulary of terms that have been used in the text of other International Standards that were developed for or are applicable to contact lenses.

This National Standard of Canada is based on International Standard ISO 15189:2003 (first edition, 2003-02-15). 1 Scope This International Standard specifies requirements for quality and competence particular to medical laboratories.

This National Standard of Canada is equivalent to International Standard IEC 60601-2-37:2001 (first edition, 2001-07). 1 Scope and object This clause of the General Standard applies except as follows: *1.1 Scope Addition: This Particular Standard specifies particular safety requirements for ULTRASONIC DIAGNOSTIC EQUIPMENT as defined in 2.1.145. This standard does not cover…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-43:2000 (first edition, 2000-06). 1 Scope and object This clause of the General Standard applies, except as follows: 1.1 Scope Addition: This Particular Standard applies to X-RAY EQUIPMENT declared by the MANUFACTURER to be suitable for prolonged RADIOSCOPICALLY GUIDED INTERVENTIONAL PROCEDURES. Its scope…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-44:2001 (second edition, 2001-06). 1 Scope and object This clause of the General Standard applies except as follows: 1.1 Scope Addition: This Particular Standard applies to X-RAY EQUIPMENT for COMPUTED TOMOGRAPHY (CT SCANNERS). It includes safety requirements for the X-RAY GENERATOR, and those where HIGH…