Rechercher

ISO 3862:2009 specifies requirements for five types of spiral-wire-reinforced hydraulic hose and hose assembly of nominal size from 6,3 to 51. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743‑4 at temperatures ranging from -40 °C to +60 °C and oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743‑4 at temperatures ranging…

ISO 4079:2009 specifies requirements for five types of textile-reinforced hydraulic hose and hose assembly of nominal size from 5 to 100. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from -40 °C to +60 ºC or oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743‑4 at temperatures ranging from…

ISO/TS 12389:2009 describes the results of the inter-laboratory testing of the chemical analysis of cement by x-ray fluorescence. In the first instance, the inter-laboratory testing was carried out in Japan and Asian countries in accordance with JIS R 5204:2002. A total of 30 laboratories, 16 in Japan and 14 outside Japan, participated in the original testing programme. A further 12 European…

ISO 13958:2009 specifies minimum requirements for concentrates used for haemodialysis and related therapies. For the purpose of this International Standard, “concentrates” are a mixture of chemicals and water, or a mixture of chemicals in the form of dry powder or other highly concentrated media, that are delivered to the end user to make dialysis fluid used to perform haemodialysis and related…

ISO 26722:2009 is addressed to the manufacturer and/or provider of water treatment systems and/or devices used for the express purpose of providing water for haemodialysis or related therapies. ISO 26722:2009 covers devices used to treat water intended for use in the delivery of haemodialysis and related therapies. Included in the scope of this International Standard is water used for: (1) the…

IEC 62047-6:2009 specifies the method for axial tensile-tensile force fatigue testing of thin film materials with a length and width under 1 mm and a thickness in the range between 0,1 µm and 10 µm under constant force range or constant displacement range. Thin films are used as main structural materials for MEMS and micromachines. The main structural materials for MEMS, micromachines, etc., have…

The electronic version of this International Standard can be downloaded from the ISO/IEC Information Technology Task Force (ITTF) web site.

ISO/IEC 22535:2009 specifies tunnelling of "QSIG" over the Session Initiation Protocol (SIP) within a corporate telecommunication network (CN). The tunnelling of QSIG through a public IP network employing SIP is outside the scope of ISO/IEC 22535:2009. However, the functionality specified in this International Standard is in principle applicable to such a scenario when deployed in…

ISO/IEC 22535:2009 specifies tunnelling of "QSIG" over the Session Initiation Protocol (SIP) within a corporate telecommunication network (CN). The tunnelling of QSIG through a public IP network employing SIP is outside the scope of ISO/IEC 22535:2009. However, the functionality specified in this International Standard is in principle applicable to such a scenario when deployed in…

IEC 60050-617:2009 has been published as a consequence of deregulation of the electricity market, it appeared necessary to establish a common glossary with those terms defining actors in the market, interface between actors and the technical or financial terms having a specific meaning in the context of electricity market. This horizontal standard IEC 60050-617:2009 is primarily intended for use…