Rechercher

This document specifies the characteristics of the system of physical photometry established by the CIE and accepted as the basis for the measurement of light. It defines the photometric quantities, units and standards that make up the CIE system of physical photometry and that have been officially accepted by the Comité International des Poids et Mesures (CIPM). This comprises: —    the…

1 Scope 1.1 Organization and content This standard applies to the design, manufacture, maintenance, qualification, inspection and marking of tank cars and the selection and use of large means of containment or transport units used in the handling, offering for transport or transporting of dangerous goods by rail of classes 2, 3, 4, 5, 8, 9 and division 6.1. This standard does not apply to…

1 Scope 1.1 General This Standard covers polyethylene/aluminum/polyethylene (PE-AL-PE) macrocomposite pipe consisting of a welded aluminum tube laminated by a melt adhesive to layers of polyethylene (PE) inside and outside the aluminum tube. The pipes covered in this Standard are pressure rated for 1380 kPa at 23 °C, 1035 kPa at 60 °C, or 690 kPa at 82 °C. Systems are intended for use in…

1 Scope 1.1 General This Standard covers crosslinked polyethylene/aluminum/crosslinked polyethylene (PEX-AL-PEX) macrocomposite pipe consisting of a welded aluminum (AL) tube laminated by a melt adhesive to layers of crosslinked polyethylene (PEX) inside and outside the aluminum tube. This Standard also covers fittings (connectors) for use with PEX-AL-PEX pipe. The pipes covered in this…

1.1 Scope This document provides requirements and guidance on the implementation of DevOps to define, control, and improve software life cycle processes. It applies within an organization or a project to build, package, and deploy software and systems in a secure and reliable way. This document specifies practices to collaborate and communicate effectively in groups including development,…

This document provides a harmonized methodology for calculating greenhouse gas (GHG) emissions from the lime industry. It includes the manufacture of lime and any downstream lime products manufactured at the plant, such as ground or hydrated lime. This document allows for reporting of GHG emissions for various purposes and on different basis, such as plant basis, company basis (by country or by…

This document specifies assembly, adjustment and inspection procedures for the binding mechanisms of skis, integrating, in a practical way, the requirements of International Standards which are related to skis, bindings and boots. It is applicable to a ski-binding-boot system (S-B-B) for alpine skiing, of which at least one component is owned by the user. This document is applicable for complete…

This document defines terms applied in the field of rolling bearings and their technology. This document includes terms related to all types of rolling bearings wherein the principal degree of freedom is continuous rotation around an axis enabled by an ordered set of rolling elements between two circular raceways such that loads can be transmitted between them in a particular range of either…

This document specifies the general principles and the procedures to be followed with thermoplastics in the preparation of compression-moulded test specimens, and sheets from which test specimens can be machined or stamped. NOTE       In order to obtain mouldings in a reproducible state, the main steps of the procedure, including eight different cooling methods, are standardized. For each…

IEC 62087-2:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 62087-2:2023 specifies the signals used to determine the power consumption of audio, video, and related equipment…