STANDARD FOR EXTERNAL CORROSION PROTECTION SYSTEMS FOR STEEL UNDERGROUND TANKS FOR FLAMMABLE AND COM...
1.1 This Standard covers requirements for external corrosion protection systems on steel non-pressure
tanks that are used for the underground storage of flammable liquids and combustible liquids. The
requirements are structured as follows:
A Section 5, Cathodically Protected Tanks, covers external corrosion protection using sacrificial
magnesium and zinc anodes, low profile nylon isolating…
Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 2: ...
1.1 This part of the IEC 61508 series
a) is intended to be used only after a thorough understanding of IEC 61508-1, which provides
the overall framework for the achievement of functional safety;
b) applies to any safety-related system, as defined by IEC 61508-1, that contains at least
one electrical, electronic or programmable electronic element;
c) applies to all elements within an E/E/PE safety…
This International Standard specifies the minimum design and performance requirements for an
instructional seat and restraint designed for limited use by a trainer or trainee or service person inside
an enclosed cab of an agricultural tractor.
The instructional seat is neither intended for, nor is it designed for use by, children.
Functional safety of electrical/electronic/programmable electronic safetyrelated systems — Part 1: G...
1.1 This International Standard covers those aspects to be considered when
electrical/electronic/programmable electronic (E/E/PE) systems are used to carry out safety
functions. A major objective of this standard is to facilitate the development of product and
application sector international standards by the technical committees responsible for the
product or application sector. This will allow…
Functional safety of electrical/electronic/programmable electronic safetyrelated systems — Part 3: S...
1.1 This part of the IEC 61508 series
a) is intended to be utilized only after a thorough understanding of IEC 61508-1 and
IEC 61508-2;
b) applies to any software forming part of a safety-related system or used to develop a
safety-related system within the scope of IEC 61508-1 and IEC 61508-2. Such software is
termed safety-related software (including operating systems, system software, software…
Earth-moving machinery — Symbols for operator controls and other displays — Part 1: Common symbols
ISO 6405-1:2017 standardizes symbols for use on operator controls and other displays applicable to multiple types of earth-moving machinery as defined in ISO 6165.
NOTE 1 ISO 6405‑2 covers symbols for specific types of earth-moving machines, equipment, and accessories.
NOTE 2 ISO 7000 and IEC 60417 can be consulted for additional internationally standardized symbols of potential…
Earth-moving machinery — Symbols for operator controls and other displays — Part 2: Symbols for spec...
ISO 6405-2:2017 standardizes symbols for use on operator controls and other displays on specific types of earth-moving machinery as defined in ISO 6165.
NOTE 1 ISO 6405‑1 covers common symbols that apply to multiple types of earth-moving machinery.
NOTE 2 ISO 7000 and IEC 60417 can be consulted for additional internationally standardized symbols of potential relevance to earth-moving…
Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical ...
IEC 61291-5-2:2017(E) applies to optical amplifiers (OAs) and optically amplified, elementary sub-systems for terrestrial applications, using active fibres (optical fibre amplifiers (OFAs)) containing rare-earth dopants, which are commercially available. The black box approach is used in this document. The black box approach is adopted in order to give product specifications which are independent…
Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance
<!-- NEW -->IEC 60793-1-1:2017 is available as IEC 60793-1-1:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
<p>IEC 60793-1-1: 2017 lists and gives guidance on the use of documents giving the uniform requirements for measuring and testing optical fibres, thereby assisting in the…
Soil quality — Sampling — Part 106: Quality control and quality assurance
ISO 18400-106:2017 provides guidelines for quality assurance and quality control (QA/QC) for soil sampling. It identifies the steps which are subject to QA and QC in situations where QA and QC are required. It addresses aspects of QA and QC of the International Standards under the ISO 18400‑100 umbrella (level 1, level 2) and gives guidance to methods on level 3.