Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofu...
This document specifies performance requirements for electrofusion control unit (ECU) for use with polyethylene (PE) electrofusion fittings conforming to ISO 4437-3,[1]ISO 4427-3[2] and ISO 15494.[3]
NOTE 1 Electrofusion fittings conforming to other documents, e.g. EN 1555-3[4] and EN 12201-3,[5] can also be within the scope of this document.
The system designed to manage the transfer of…
Salles propres et environnements maîtrisés apparentés — Partie 5: Exploitation
Le présent document spécifie les exigences relatives à la mise en place d’un programme de maîtrise de l’exploitation (OCP, Operations Control Programme) afin de garantir une exploitation efficace des salles propres qui respecte les niveaux de propreté définis. L’OCP comprend la gestion du personnel, l’entrée et la sortie du personnel et des matières, le nettoyage, la maintenance et la…
Road vehicles — EQuipment eXchange (EQX) — Data format specification for operational information rel...
This document defines a data format to exchange data that is relevant for exchanging and using measurement equipment between calibration service providers, laboratories and requestors in vehicle safety testing.
Additional content found on https://standards.iso.org/iso/ts/23520/ed-1/en defines standard exchange for equipment grouping and metadata definitions for test documentation.
Related…
Electronic fee collection — Interface definition for on-board account using an integrated circuit ca...
This document specifies the data transfer models between roadside equipment (RSE) and integrated circuit cards (ICCs) and the interface descriptions between the RSE and on-board equipment (OBE) for on-board accounts using an ICC. It also provides examples of interface definitions and transactions deployed in several countries.
This document covers:
— data transfer models between the RSE and…
Telecontrol equipment and systems - Part 5-7: Transmission protocols - Security extensions to IEC 60...
IEC TS 60870-5-7:2025, which is a technical specification, describes messages and data formats for implementing IEC 62351-5:2023 for secure communication as an extension to IEC 60870-5-101 and IEC 60870-5-104.
The purpose of this document is to permit the receiver of any IEC 60870-5-101/-104 Application Protocol Data Unit (APDU) to verify that the APDU was transmitted by an authorized user and…
1 Domaine d’application
1.1 Fluides transportés
La présente norme s’applique aux systèmes d’énergie liquide et gazeuse qui transportent :
a)
des hydrocarbures liquides, y compris le pétrole brut, les fluides multiphasiques, les condensats et les produits pétroliers liquides;
b)
des liquides de gaz naturel et du gaz de pétrole liquéfié;
c)
de l’eau de champs pétroliers;
d)
de la vapeur…
Earth-moving machinery and mobile road construction machinery — Worksite data exchange — Part 4: Wor...
This document specifies requirements for data exchange at the interface between earth-moving machinery, as defined in ISO 6165, mobile road construction machinery, as defined in ISO 22242, and the worksite information systems. It focuses on data for management of a worksite and the assets specific to that worksite.
This document includes:
a) methods of local position correction and…
Engins de terrassement et machines mobiles de construction de routes — Échange de données sur le cha...
Le présent document spécifie les exigences relatives à l’échange de données à l’interface entre les engins de terrassement, tels que définis dans l’ISO 6165, les machines mobiles pour la construction de routes, telles que définies dans l’ISO 22242 et les systèmes d'information du chantier. Il met l’accent sur les données nécessaires à la gestion d'un chantier et sur les ressources…
1 Scope
1.1 Inclusions
This Code applies to the installation of
a)
appliances, equipment, components, and accessories where gas is to be used for fuel purposes;
b)
piping and tubing systems extending downstream from the termination of the utility installation or from any equipment extending downstream from the outlet of any propane container pressure regulator (commonly referred to as “…
Graphical symbols for diagrams - 12-month subscription to regularly updated online database comprisi...
IEC 60617:2012 DB contains graphical symbols for use in electrotechnical diagrams. Parts 2 to 13 of IEC 60617 have been incorporated into a database that currently includes some 1900 symbols. The database is the official source of IEC 60617. It replaces parts 2 to 13 of the previous published version (edition 2) of IEC 60617. The following areas are covered in the database: Conductors and…
