Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 2: Semi-rigid hoses (an...
ISO 4642-2:2009 specifies the requirements and test methods for semi-rigid reel hoses for use on fire fighting vehicles and trailer pumps. The hoses are intended for use at a maximum working pressure of 1,5 MPa for normal pressure hoses (category I) and 4,0 MPa for high pressure hoses (category II). The hoses are further subdivided into types and classes.
ISO 4642-2:2009 applies to delivery hoses…
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: ...
ISO 7919-3:2008 gives guidelines for applying evaluation criteria of shaft vibration under normal operating conditions, measured at or close to the bearings of coupled industrial machines.
Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 1: Semi-rigid hoses for...
ISO 4642-1:2009 specifies the requirements and test methods for semi-rigid reel hoses for fire-fighting purposes for use with fixed systems. The hoses are intended for use at a maximum working pressure of 1,2 MPa for hoses of 19 mm and 25 mm inside diameter and 0,7 MPa for hoses of 33 mm inside diameter.
Hoses conforming to ISO 4642-1:2009 are intended for applications where long intervals can…
Information technology — Digitally recorded media for information interchange and storage — Data mig...
ISO/IEC 29121:2009 provides specifications of the data migration method for archival data storage which allow manufacturers storage systems that use DVD-R (ISO/IEC 23912:2005), DVD-RW (ISO/IEC 17342:2004), DVD-RAM (ISO/IEC 17592:2004), +R (ISO/IEC 17344:2006 and ISO/IEC 25434:2007), and +RW (ISO/IEC 17341:2006 and ISO/IEC 26925:2006) disks for information storage to classify disk longevity…
Tubes et raccords en matières plastiques — Préparation d'éprouvettes par assemblage tube/tube o...
L'ISO 11414:2009 spécifie une méthode de préparation des éprouvettes par assemblage entre des tubes en polyéthylène (PE) et des bouts mâles des raccords, par soudage bout à bout.
L'ISO 11414:2009 spécifie les différents paramètres d'assemblage, tels que la température ambiante, la géométrie du raccordement et les paramètres de soudage, en tenant compte des conditions limite de…
Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece ...
ISO 11414:2009 specifies a method for preparing butt-fusion-jointed test piece assemblies between polyethylene (PE) pipes and spigot-ended fittings.
ISO 11414:2009 specifies the assembly parameters involved, such as the ambient temperature, joint geometry and fusion parameters, taking into account the service condition limits specified in the relevant product standards, as well as the type of…
Road vehicles — Location of hand controls, indicators and tell-tales in motor vehicles
ISO 4040:2009 specifies the location of controls in motor vehicles by subdividing the space within reach of drivers into specific zones, to which certain controls essential to the safe operation of vehicles are assigned. It also specifies certain combinations of functions for multifunction controls and the degree to which certain indicators and tell-tales are to be visible.
ISO 4040:2009 is…
Space data and information transfer systems — Image data compression
ISO 26868:2009 establishes a data compression algorithm applicable to two-dimensional digital spatial image data from payload instruments and specifies how this compressed data is formatted into segments to enable decompression at the receiving end.
Source coding for data compression is a method utilized in data systems to reduce the volume of digital data to achieve benefits in areas including,…
Space systems — Launch-vehicle-to-spacecraft flight environments telemetry data processing
ISO 15862:2009 provides basic requirements for the measurement of the spacecraft flight environments generated by the launch vehicle, telemetry data processing and formats of analysis reports.
ISO 15862:2009 defines the field and number of measurement parameters, the principles of data processing, the format of delivered data and the content and the form of the flight environment analysis report…
Clinical dosimetry — Beta radiation sources for brachytherapy
ISO 21439:2009 specifies methods for the determination of absorbed-dose distributions in water or tissue that are required prior to initiating procedures for the application of beta radiation in ophthalmic tumour and intravascular brachytherapy]. Recommendations are given for beta-radiation source calibration, dosemetry measurements, dose calculation, dosemetric quality assurance, as well as for…
