1 Scope
1.1
This Standard applies to ac and dc motors with inherent overheating protection designed to be used in
accordance with the Canadian Electrical Code, Part I, as follows:
a) motors with a voltage rating not exceeding 600 V and with a protective device connected in the
motor circuit;
b) impedance-protected motors with a voltage rating not exceeding 600 V; and
c) motors with a…
Shielded power cable for commercial and industrial applications, 5–46 kV
1 Scope
1.1
This Standard applies to the materials, construction, and testing of one- to four-conductor cross-linked
polyethylene and ethylene propylene rubber-insulated shielded power cables, rated 5–46 kV, that are
used for the distribution of electrical energy under normal conditions of installation and service in indoor,
outdoor, aerial, underground, or underwater locations.
1.2
This…
Energy performance and water consumption of household dishwashers
1 Scope
1.1
This Standard specifies
a) methods to be used in measuring the energy and water consumption levels of household
dishwashers; and
b) maximum and high efficiency energy and water consumption limits for household dishwashers.
1.2
This Standard applies to household electrically-powered automatic dishwashers designed for a 60 Hz ac
supply and a nominal system voltage not exceeding 250 V.
1…
Détermination des mouvements du sol pour la qualification parasismique des centrales nucléaires
1.1
Cette norme décrit les études exigées pour obtenir les informations sismologique et géologique en
fonction desquelles seront déterminés, relativement à l’emplacement projeté ou actuel d’une centrale
nucléaire, les mouvements sismiques du sol qui serviront à établir la qualification parasismique des
structure et des systèmes dont dépend la sécurité, de même que les possibilités que se…
1 Scope
1.1
This Standard applies to complete wind turbine electrical systems and associated electrical equipment
intended for connection at not more than 46 kV and intended for use in accordance with the Canadian
Electrical Code, Part I. Products covered by the scope of this Standard are subject to the requirements
of CAN/CSA C22.2 No. 0.
1.2
This Standard applies to wind turbines of all…
Déclassement des installations contenant des substances nucléaires
1.1
Cette norme s’applique au déclassement des installations autorisées et d’autres sites où des substances
nucléaires sont gérées, possédées ou entreposées.
Notes :
1) Les utilisateurs sont responsables de déterminer la portée de l’application de cette norme dans une
installation ou un emplacement donné, et vérifier les exigences réglementaires connexes.
2) Les annexes E, F G et K…
1.1 General
This Standard specifies special requirements for the durability aspects of the design and construction of
new parking structures and parts of buildings subject to vehicular traffic.
This includes pedestrian traffic areas adjoining to or contained within parking structures. These include
areas such as stairs, and pedestrian bridges from parking structures.
1.2 Structure types…
Sustainability Standard for household portable and floor care appliances
Scope
1.1
This Standard covers portable and floor care home appliances intended for household use, including
(a) air treatment appliances;
(b) food and beverage preparation appliances;
(c) counter top cooking appliances;
(d) personal care appliances;
(e) garment care appliances; and
(f) floor care appliances.
See Annex B for a list of portable and floor care home appliances under these…
Effective sterilization in health care settings by the steam process
1 Scope
1.1
This Standard specifies essential elements for using steam to sterilize medical devices in health care
settings, with the object of achieving an adequate level of sterility assurance and minimizing the risk of
injury to health care setting personnel and patients.
Notes:
1) The term “health care setting” includes, but is not limited to, hospitals, nursing homes, extended-care…
Huiles isolantes minérales électriques pour transformateurs et matériels de coupure
1 Domaine d’application
1.1
Cette norme prescrit les exigences visant les huiles minérales d’origine pétrolière destinées aux
transformateurs, aux disjoncteurs à bain d’huile et aux autres appareils électriques (sauf les câbles haute
tension) dont l’isolation et le refroidissement sont assurés par un liquide.
1.2
Dans cette norme, le terme «doit» indique une exigence, c’est-à-dire une…
