Rechercher

1.1 This standard covers rubber gasketed fittings intended for assembling sections of pipe in fire protection systems, for example, couplings to attach pipe sections end to end, and side outlets to attach pipe sections at right angles. 1.2 The products covered by this standard are intended for use in fire protection service as outlined by the following Standards of the National Fire…

1.1 Cette norme concerne les raccords munis de joints en caoutchouc conçus pour l’assemblage de sections de tuyau dans les systèmes de protection incendie, par exemple, les raccords pour attacher les sections de tuyau bout à bout et les sorties latérales pour attacher les sections de tuyau à angle droit. 1.2 Les produits concernés par la présente norme sont destinés au service de protection…

This document specifies requirements for the construction and performance of marine magnetic compasses for navigation and steering purposes, binnacles and azimuth reading devices. Two types of binnacle are specified; the appropriate type for a given vessel is determined by the design of the ship (see Clause 5). This document applies to liquid-filled magnetic compasses: — intended for use…

The document defines terms related to smoke corrosivity as well as smoke acidity and smoke toxicity. It presents the scenario-based approach that controls smoke corrosivity. It describes the test methods to assess smoke corrosivity at laboratory scale and deals with test applicability and post-exposure conditions. This document is applicable to tests of determination of smoke corrosivity from…

This document specifies requirements and provides recommendations and guidance for the design, construction, transportation, installation and decommissioning of offshore structures related to the activities of the petroleum and natural gas industries in arctic and cold regions. Reference to arctic and cold regions in this document is deemed to include both the Arctic and other locations…

This document specifies the mating dimensions for thermoplastic flange adapters and corresponding loose backing flanges intended to be used in thermoplastic piping systems for the conveyance of fluids under pressure. It applies to flange adapters and loose backing flanges for use with pipes with nominal outside diameters (dn) from 16 mm to 2 500 mm and nominal pressures up to 25 bar[1] (PN 25).…

This document provides definitions of all common terms used in the area of space systems and operations for programme management and quality. It does not contain terms specific to an individual International Standard in the area of space systems and operations, which are defined in that particular International Standard.

Le présent document spécifie une procédure d'essai, les conditions d'environnement et l'instrumentation pour le mesurage en continu du niveau de pression acoustique extérieur des véhicules à l'arrêt pour une plage de régime moteur. Le présent document s'applique seulement aux véhicules routiers de catégories L, M et N équipés de moteur à combustion interne. Les véhicules…

This document, in conjunction with ISO 18079-1, specifies provisions for servicing stations conducting servicing of immersion suits, anti-exposure suits and constant wear suits, including, but not limited to, those subject to IMO regulations, recommendations and guidelines.

This document specifies a method for the gas-chromatographic determination of the solvents in water-thinnable paints and varnishes, binder solutions, emulsions and dispersions. With the precision stated in Clause 13, single components above 0,02 % (mass fraction) can be determined quantitatively. The method defined in this document is not applicable for the determination of Volatile Organic…