Information géographique — Services de positionnement
Le présent document indique la structure des données et le contenu d'une interface qui permet la communication entre un ou plusieurs dispositifs de mesure de position et un ou plusieurs dispositifs utilisant les données de position de sorte que ces derniers puissent obtenir et interpréter les informations de position sans ambiguïté et déterminer, en se fondant sur une mesure du degré de…
Wood — Sampling methods and general requirements for physical and mechanical testing of small clear ...
This document specifies methods for the extensive and limited sampling of wood, conditioning and preparation of test pieces. It also specifies the general requirements for physical and mechanical testing of small clear wood specimens. The sampling guidance provided in this document can be applied for timber taken from either trees, logs, or pieces of ungraded/graded/presorted sawn timber for non-…
Arc welding equipment — Part 6: Limited duty equipment
1 Scope
This part of IEC 60974 specifies safety and performance requirements applicable to limited
duty arc welding and cutting power sources and auxiliaries designed for use by laymen.
Electrically powered equipment is intended to be connected to the single phase public lowvoltage
supply system. Engine driven power sources cannot exceed output power of 7,5 kVA.
NOTE 1 This equipment is…
Matériel de soudage à l’arc — Partie 6 : Matériel à service limité
1 Domaine d’application
La présente partie de l’IEC 60974 spécifie les exigences de sécurité et de performance qui
s’appliquent aux sources de courant de soudage et de coupage à l'arc à service limité et
équipement auxiliaires conçus pour être utilisés par des personnes non professionnelles. Le
matériel électrique est prévu pour être connecté à un système d'alimentation public à…
Photovoltaic (PV) module safety qualification — Part 1: Requirements for construction
1 Scope
This part of IEC 61730 specifies and describes the fundamental construction requirements for
photovoltaic (PV) modules in order to provide safe electrical and mechanical operation.
Specific topics are provided to assess the prevention of electrical shock, fire hazards, and
personal injury due to mechanical and environmental stresses. This part of IEC 61730
pertains to the particular…
Photovoltaic (PV) module safety qualification — Part 2: Requirements for testing
1 Scope
The scope of IEC 61730-1 is also applicable to this part of IEC 61730. While IEC 61730-1
outlines the requirements of construction, this part of the standard lists the tests a PV module
is required to fulfill for safety qualification. IEC 61730-2 is applied for safety qualification only
in conjunction with IEC 61730-1.
The sequence of tests required in this standard may not test for…
1 Scope
1.1
This Standard applies to gas convenience outlets, hereinafter referred to as gas outlets and optional enclosures, not to exceed 1-1/2 in (38.1 mm) and pressures not to exceed 5 psi (34.5 kPa), capable of operation at temperatures between 32 °F and 200 °F (0 °C and 93.3 °C) if intended for indoor use only, or between –20 °F and 200 °F (–28.8 °C and 93.3 °C) if intended for indoor/…
Manual and automatic gas selector devices for use with gas-fired appliances
1 Scope
1.1
This Standard applies to newly produced gas selector devices (see Clause 3), herein after referred to as a “device”, constructed entirely of new, unused parts and materials.
1.2
The device may include functions such as selection of type of gas to operate the appliance and main burner primary air adjustment. The device may also contain multiple passageways that can be selected to…
Flood resilient design of new residential communities
1 Scope
1.1 Inclusions of the Standard
1.1.1 Purpose of this Standard
The purpose of this Standard is to provide compliance criteria and guidance on the design of flood- resilient new residential communities as it relates to greenfield development only.
1.1.2 Building types
This Standard is applicable to the following building types:
a)
detached homes;
b)
semi-detached homes;
c)
row…
Conception résiliente aux inondations pour les nouveaux secteurs de développement résidentiel
1 Domaine d’application
1.1 Inclusions de la norme
1.1.1 Objectif de cette norme
L’objectif de cette norme est de fournir des critères de conformité et des directives pour la conception de nouveaux ensembles résidentiels résilients aux inondations, en ce qui concerne l’aménagement en zone verte seulement.
1.1.2 Types de bâtiments
Cette norme s’applique aux types de bâtiments suivants :
a)…
