Rechercher

Purpose This standard specifies the requirements that institutions are expected to meet in the design and delivery of all components of their health education programs to ensure they are effective and integrated. This standard provides: Educational institutions and clinical settings with national guidance on program quality for health education programs. Regulators with a national standard on…

Objectif La présente norme précise les exigences que les établissements d’enseignement doivent respecter lors de la conception et de la prestation de tous les éléments de leurs programmes d’éducation en santé afin de s’assurer qu’ils sont efficaces et intégrés. La présente norme présente : les établissements d’enseignement et les milieux cliniques avec des conseils à l’échelle pancanadienne…

1 Scope 1.1 This Standard covers polyethylene (PE) pipe, tubing, and fittings for use in potable cold water supply services or other applications such as water-based ground source geothermal systems. 1.2 This Standard specifies requirements for materials, quality of work, dimensions, sustained pressure, environmental stress cracking, and markings. 1.3 In this Standard, “shall” is used to…

1 Scope 1.1 This Standard covers rigid polyvinylchloride (PVC) injection-moulded fittings that have gasketed joints and are intended for use in pressure applications such as water mains, water service piping, process piping, and fire lines. Fittings covered by this Standard are suitable for use with PVC pipes having outside diameter dimensions of cast iron pipe. Only one pressure rating, 1620…

1 Scope 1.1 This Standard applies to permanently connected, single or multi-branch circuit, multi-circuit output, solid-state lighting controls rated at 600 V and less, 50 or 60 Hz; single or three phase; with or without overcurrent protection on the load side; with or without integral load switching devices; designed to be used as a complete solid-state lighting control system for the purpose…

1 Scope This document provides specific requirements for process sealing between a flammable process fluid and an electrical system where a failure could allow the migration of the process fluid directly into the premises wiring system. NOTE Some definitions differentiate the terms “flammable” and “combustible” liquids on the basis of their flashpoints. Combustible liquids under conditions…

1 Domaine d’application 1.1 Cette norme s’applique au contreplaqué multiplis à joint extérieur qui comporte au moins trois plis et dont les plis les plus à l’extérieur ont une direction de grain parallèle. 1.2 Cette norme spécifie les exigences relatives aux points suivants : a) un système de gestion de la qualité; b) les matériaux; c) la construction de panneaux; d) le collage; e)…

1 Scope 1.1 This Standard applies to eye and face protectors used in all occupational and educational operations or processes involving hazards to the eyes or face. Typical hazards include flying objects and particles, splashing liquids, molten metal, and ultraviolet, visible, and infrared radiation, but do not include X-rays, gamma rays, high-energy particulate radiation, radioactive materials…

1 Scope 1.1 This Standard specifies requirements for the following types of control cables, rated 30 V maximum, intended for use in extra-low-voltage control circuits in accordance with CSA C22.1, Canadian Electrical Code, Part I: a) Type LVT extra-low-voltage control circuit cables, rated 60 °C maximum; b) Low-energy control cables, rated 105 °C maximum; c) Type ELC extra-low-voltage…

1 Scope 1.1 1.1.1 This Standard addresses risks to northern infrastructure due to wind, snow, and snow drifting. It incorporates the following themes, all in the context of Canada’s North and climate change: a) weather data, climate variables, and relevant projections and forecasts; b) reducing risk of damage; c) climate adaptation strategies; d) improving function and accessibility;…