Rechercher

Ontario Electrical Safety Code (OESC) bulletins are published by the Electrical Safety Authority (ESA); they provide updates on regulatory requirements, additional interpretation on specific Code Rules, and direction to industry on timely issues. As an electrical professional working in the province of Ontario, it is your responsibility to be aware of the content contained in these bulletins as…

1 Scope [Replace the last three paragraphs with the following] This Standard applies to hoists and body-support units (assistive devices) used to transfer, typically by suspending from above, disabled persons between beds, chairs, stretchers, bathtubs, or other similar resting places or standing positions. For example, this Standard applies to hoists and body-support units often referred to as…

1 Domaine d'application [Remplacer les trois derniers paragraphes par ce qui suit] Cette norme s’applique aux lève-personnes et aux éléments de soutien destinés au transfert de personnes handicapées; typiquement entre un lit, un fauteuil, une civière, une baignoire, ou autre ou à les aider à se lever. Ainsi, cette norme s’applique aux lève-personnes et aux éléments de soutien souvent appelés…

This part of ISO 18134 describes the method of determining the total moisture content of a test sample of solid biofuels by drying in an oven and may be used when the highest precision is not needed, e.g. for routine production control on site. The method described in this International Standard is applicable to all solid biofuels. The moisture content of solid biofuels (as received) is always…

1.1 Cette norme s’applique à : a) la conception ; b) la localisation ; c) la construction ; d) l’exploitation ; et e) l’entretien des installations qui servent à la liquéfaction du gaz naturel, au stockage, à la regazéification, au transfert, à la manutention et au transport par camions-citernes du GNL. Elle contient également des exigences visant la formation du personnel. 1.2 En ce qui a trait…

1.1 This Standard specifies requirements for the material, analysis and design, construction, fabrication, inspection, examination, and aging management of safety-related structures for nuclear power plants. Safety-related structures covered in this Standard are a) structures that support, house, or protect nuclear safety systems; b) components of structures that are required for the safe…

1.1 This Standard applies to newly produced Type I, Type II, and Type III hose used for the transfer or conducting of propane and natural gas. 1.2 The hose and hose assemblies covered in this Standard are capable of operation at temperatures between -40°F (-40 °C) and 140°F (60 °C). 1.3 Type I hose refers to hose with a maximum operating pressure of 350 psig (2.4 MPa) and a minimum burst…

1.1 Scope [Add the following paragraphs and note] The object of this Part 1 Standard is to specify general electrical safety requirements for certain products. The requirements of this Standard apply to a specific end-use product when it is explicitly referred to by that product standard. Each individual product standard may supplement, modify, or omit a general rule in the Part 1 Standard…

1.1 This Standard applies to manual lever operated gas shut-off valves, sizes NPS ¼ inch to 8 inch, of metallic construction with welded, or flanged, or threaded ends other than pressure lubricated designs for use with natural gas, manufactured gas, and liquefied petroleum gases (distributed as vapour with or without the admixture of air), or mixtures thereof that are suitable for use between…

1.1 This Standard defines requirements for the periodic inspection of balance of plant pressure retaining systems, components, and supports that form part of a CANDU nuclear power plant using a risk informed in-service inspection (RI-ISI) methodology. Periodic inspection (see Annex A for additional guidance) is considered to include the fluid boundary portions of balance of plant systems,…