Rechercher

This document specifies the main requirements, including size designation and marking, of 5-degree tapered and flat base rims primarily intended for industrial vehicles for use on prepared surfaces.

This document specifies the load ratings of the metric series of pneumatic tyres primarily intended for industrial vehicles for use on prepared surfaces. ISO 3739-1 deals with designation, dimensions and marking; ISO 3739-3 deals with rim contours for these tyres.

This document specifies the main requirements of the metric series of pneumatic tyres primarily intended for industrial vehicles, including designations, dimensions and markings. The tyres are based on the following parameters: —    speeds not exceeding 50 km/h; —    use on 5° tapered or flat base rims. The conversion of code-designated industrial tyres into metric-designated tyres is outside the…

ISO 13196:2013 specifies the procedure for screening soils and soil-like materials for selected elements when handheld or portable energy-dispersive XRF spectrometers are used. This quick method is assumed to be applied on-site to obtain qualitative or semiquantitative data that assists decisions on further sampling strategy for assessing soil quality. The higher the efforts for pretreatment used…

This document specifies the method for the determination of the volume of gas-leakage from the interface between hose and fitting or interface between tubing and fitting by assembly fault. Explanation of leakage determined by the test method in this document is provided in Annex A. Conception of leakage is shown in Figure A.1 and A.2.

ISO 13347-3:2004 applies to industrial fans as defined in ISO 5801 and ISO 13349. It is limited to the determination of airborne sound emission for the specified set-ups. Vibration is not measured, nor is the sensitivity of airborne sound emission to vibration effects determined. The sizes of fan which can be tested in accordance with ISO 13347-3:2004 are limited only by the practical aspects of…

This document specifies definitions and general requirements for cell viability analytical methods. It provides general considerations for selecting and establishing fit-for-purpose cell viability analytical methods. It also provides considerations for managing sources of variability for cell viability measurements during pre-analytical, analytical, and post-analytical phases. This document is…

This document specifies the safety requirements for rock drill rigs and rock reinforcement rigs designed for the following underground or surface operations: a) blast hole drilling; b) rock reinforcement; c) drilling for secondary breaking; d) dimensional stone drilling; e) mineral prospecting, e.g. utilizing core drilling or reverse circulation; f) water and methane drainage drilling; g) raise…

This Standard describes the determination of height-resolved profiles of atmospheric backscattering by means of active optical sounding. The measurements allow the following properties of the atmosphere up to several kilometres above ground to be derived: • Cloud bases • Upper boundaries of optically thin clouds • Upper and lower boundaries and internal structures of particle layers: – The height…