Rechercher

This document addresses the impact of wildland fires and firefighting activities on the environment (air, water, soil, wildlife and vegetation). It further addresses the impact of wildland fire effluents on exposed human population, including firefighters, as well as food production, land, sea and air traffic, and the built environment. It also describes the environmental impacts of firefighting…

1 Scope This part of IEC 60079 specifies the general requirements for construction, testing and marking of Ex Equipment and Ex Components intended for use in explosive atmospheres. The standard atmospheric conditions (relating to the explosion characteristics of the atmosphere) under which it may be assumed that Ex Equipment can be operated are: • temperature –20 °C to +60 °C; • pressure 80…

1 Scope This part of the lEC 60320 sets the dimensions for appliance couplers for two poles and two poles with earth contact – for the connection of electrical devices for household and similar onto the mains supply and – for the interconnection of the electrical supply to appliance or equipment – and dimensions for gauges. 1DV D1 Modify Clause 1 by replacing the first sentence with the…

1 Domaine d'application La présente partie de l’IEC 60320 établit les dimensions applicables aux connecteurs bipolaires et bipolaires avec contact de terre – pour raccordement des dispositifs électriques pour usages domestiques et analogues à l'alimentation électrique et – pour raccordement de l'alimentation électrique aux appareils d'utilisation ou autres matériels…

1 Scope This document specifies the characteristics of the UPnP networked service named WANIPConnection, version 2. This service definition is compliant with UPnP Device Architecture 1.0 [1] . It is one component of the Device Control Protocol for the UPnP Internet Gateway Device (see [3]). This service enables a UPnP control point to: ? configure and control an IP connection between a LAN…

Scope Replacement: This document applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of a HUMIDIFIER, also hereafter referred to as ME EQUIPMENT, in combination with its ACCESSORIES, the combination also hereafter referred to as ME SYSTEM. This document is also applicable to those ACCESSORIES intended by their MANUFACTURER to be connected to a HUMIDIFIER where the characteristics of those…

Domaine d’application Remplacement: Le présent document s’applique à la SECURITE DE BASE et aux PERFORMANCES ESSENTIELLES d’un HUMIDIFICATEUR, ci-après également désigné par APPAREIL EM, associé à ses ACCESSOIRES, dont la combinaison est ci-après désignée par SYSTEME EM. Le présent document s’applique également aux ACCESSOIRES conçus par leur FABRICANT pour être raccordés à un…

1 Scope 1.1 This Standard specifies test procedures and minimum performance requirements for general service integrated lamps and small diameter directional lamps. 1.2 This Standard includes common testing procedures and performance requirements applicable to all general service integrated lamps, as well as some specific testing procedures and performance requirements applicable to non-solid-…

1 Scope This service definition is compliant with the UPnP Device Architecture version 1.0 [14]. It defines a service type referred to herein as ScheduledRecording service. The ScheduledRecording service is a UPnP service that allows control points to schedule the recording of content. Generally, this content is broadcast content, but this specification does not limit itself to broadcast…

1 Scope This document specifies the characteristics of a device that manages connectivity to the Internet as an “edge” device between a residential Local Area Network and a Wide Area Network. The gateway can be physically implemented as a standalone device, or logically as a set of UPnP devices and services on a PC. This specified device is intended to be controlled from inside the home…