Cycle thermique étendu de modules PV - Procédure d'essai
l'IEC 62892:2019 définit une séquence d'essais qui étend l'essai de cycle thermique de l'IEC 61215-2. Il est destiné à différencier les modules photovoltaïques avec une meilleure durabilité par rapport au cycle thermique et à évaluer les modules pour un déploiement dans les lieux plus exposés aux contraintes de cycle thermique. Le présent document repose sur l'aptitude…
Electrically propelled road vehicles — Safety specifications — Part 1: Rechargeable energy storage s...
This document specifies safety requirements for rechargeable energy storage systems (RESS) of electrically propelled road vehicles for the protection of persons.
It does not provide the comprehensive safety information for the manufacturing, maintenance and repair personnel.
NOTE 1 Requirements for motorcycles and mopeds are specified in ISO 13063 and ISO 18243.
NOTE 2 Additional safety…
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric thre...
This document specifies dimensions for metric ports for use with the adjustable and non-adjustable stud ends as described in ISO 6149‑2 and ISO 6149‑3.
Ports in accordance with this document can be used at working pressures up to 63 MPa [630 bar[1]] for non-adjustable stud ends and 40 MPa (400 bar) for adjustable stud ends. The permissible working pressure depends upon port size, materials,…
Raccordements pour transmissions hydrauliques et applications générales — Orifices et éléments mâles...
Le présent document spécifie les dimensions des orifices métriques pour utilisation avec les éléments mâles orientables et non orientables tels que décrits dans l'ISO 6149‑2 et l'ISO 6149‑3.
Les orifices conformes au présent document peuvent être utilisés jusqu'à des pressions de travail de 63 MPa [630 bar[1]] pour les éléments mâles non orientables et jusqu'à 40 MPa (400 bar…
Earth-moving machinery — Safety — Part 15: Requirements for compact tool carriers
This document gives the safety requirements specific to compact tool carriers. It is intended to be used in conjunction with ISO 20474‑1, which specifies general safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 20474‑1.
This document deals with all significant hazards,…
Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resona...
This document describes a torsional, non-resonance method for determining the components of the shear complex modulus G* of solid polymers in the form of bars or rods at frequencies typically in the range 0,001 Hz to 100 Hz. Higher-frequency measurements can be made, but significant errors in the dynamic properties measured are likely to result (see 10.2.1 and 10.2.2). The method is suitable for…
Passenger cars — Braking in a turn — Open-loop test method
This document specifies an open-loop test procedure to examine the effect of braking on course holding and directional behaviour of a vehicle. Specifically, the method determines how the steady-state circular response of a vehicle is altered by a braking action only. This document is applicable to passenger cars as defined in ISO 3833 and to light trucks.
The open-loop manoeuvre specified in this…
Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in controlled...
This document specifies a method of evaluating the ultimate anaerobic biodegradability of plastic materials in a controlled anaerobic slurry digestion system with a solids concentration not exceeding 15 %, which is often found for the treatment of sewage sludge, livestock faeces or garbage. The test method is designed to yield a percentage and rate of conversion of the organic carbon in the test…
Automation systems and integration — Interoperability of capability units for manufacturing applicat...
This document specifies a set of template definitions to describe the capability of a software unit of an automation solution that can be mapped to the functional requirements of a target manufacturing application.
This document specifies how to develop and manage a software unit catalogue in terms of capability properties and defines mapping rules from capability profiles to a software unit…
