Rechercher

This document specifies the construction, dimensions and marking of unscreened sheathed low-voltage multi-core cables for the connection of towing and towed vehicles, suitable for temperature range of class A and class B defined in ISO 6722‑1:2011, Table 1.

This document specifies a method for the sampling and analysis of airborne organic isocyanates in workplace air. This document is applicable to a wide range of organic compounds containing isocyanate groups, including monofunctional isocyanates (e.g. phenyl isocyanate), diisocyanate monomers [e.g. 1,6-hexamethylene diisocyanate (HDI), toluene diisocyanate (TDI), 4,4′-diphenylmethane diisocyanate…

ISO 11783 specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements, and information-storage and -display units, whether mounted on, or part of, the tractor or implement. ISO…

This document specifies fuse-links with axial terminals (Strip fuse-links) Types SF36‑70V, SF51‑70V and SF56‑70V used in road vehicles. It establishes, for these fuse-link types, the rated current, test procedures, performance requirements, and dimensions. This document is applicable to fuse-links with a rated voltage of 70 V DC, a rated current of 30 A to 500 A, and a breaking capacity of 2 500…

This document specifies a method for the determination of the particle size distribution of coating powders by sieve analysis. Particle size distributions with a maximum of less than 100 µm is determined by laser diffraction, ISO 8130‑13. This method is used especially for determining the oversize material or for the presence of contamination and can be used as a quality control procedure ("…

This document specifies a method for the determination of loss of mass on stoving of coating powders that are to be applied by electrostatic spraying or flock spraying or fluidized bed. The method described in this document is a simple, practical test which provides sufficiently accurate results for coating powders that lose approximately 2 % (by mass) on stoving (heating). Above 2 %, accuracy…

This document specifies a comparative method for determining the flow characteristic of a fused thermosetting coating powder down a plane inclined at a set angle to the horizontal. The aim of the test method described in this document gives an indication of the degree of melt flow that can occur during the curing of the coating powder. This characteristic contributes to the surface appearance and…

This document specifies a visual method to determine the deterioration of surface quality of the final coating when mixing two different coating powders. The surface quality will depend on the following characteristics of the coating powders: a) the chemical reactivity; b) the chemical composition; c) the melt properties. The onset of the incompatibility in appearance, its nature and its…

This document specifies a method for the determination of the equivalent-sphere particle size distribution of coating powders by laser diffraction, for particles of the size range from 1 µm to 300 µm. NOTE There is a possibility that particle sizes >300 µm need the use of a different optical model. This document is specific for the measurement of coating powders and also draws attention…

This document defines special terms used in the field of coating powders. Other terms and definitions related to paints and varnishes are given in ISO 4618.