Footwear sizing — Mondopoint system of sizing and marking
This document specifies a method of designation and marking of footwear size called Mondopoint, based on defined measurements of the foot that the footwear is intended to fit.
This document is applicable to all types of footwear.
Rubber, vulcanized or thermoplastic — Determination of volume and/or surface resistivity
This document specifies a method for the determination of the volume and the surface resistivity of vulcanized or thermoplastic rubbers. The method can be applied to materials with a resistivity from 101 Ω⋅m to 1017 Ω⋅m.
Determination of particle density by sedimentation methods — Part 2: Multi-velocity approach
This document specifies an in situ method for the determination of the density of solid particles or liquid droplets (herein referred to as "particle") dispersed in liquid continuous phase. The method is based on direct experimental determination of particle velocity in these liquids or media in gravitational or centrifugal fields based on Stokes law. The particle density is calculated…
Travaux sous tension - Vêtements de protection contre les dangers thermiques d'un arc électriqu...
IEC 61482-1-1: 2019 définit des procédures d’essai permettant de déterminer la valeur assignée d’arc des matériaux pour vêtements et des articles d’habillement ou assemblages d’articles d’habillement résistant à la flamme, destinés à être utilisés dans les vêtements pour travailleurs en cas de danger d’arc électrique.
Un arc ouvert dans des conditions de laboratoire contrôlées permet de…
Wind energy generation systems - Part 24: Lightning protection
IEC 61400-24:2019 applies to lightning protection of wind turbine generators and wind power systems. Refer to guidelines for small wind turbines in annex.
This document defines the lightning environment for wind turbines and risk assessment for wind turbines in that environment. It defines requirements for protection of blades, other structural components and electrical and control systems…
Systèmes de génération d’énergie éolienne - Partie 24: Protection contre la foudre
l’IEC 61400-24:2019 s’applique à la protection des aérogénérateurs et des parcs éoliens contre la foudre. Se reporter à l’Annexe M pour les lignes directrices applicables aux éoliennes de petite taille.Le présent document définit l’environnement de foudre applicable aux éoliennes et l’appréciation du risque pour ces mêmes éoliennes dans cet environnement. Il définit les exigences concernant la…
Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-1: Test m...
IEC 61482-1-1:2019 specifies test method procedures to determine the arc rating of flame resistant clothing materials and garments or assemblies of garments intended for use in clothing for workers if there is an electric arc hazard.
An open arc under controlled laboratory conditions is used to determine the values of ELIM, ATPV or EBT of materials, garments or assemblies of garments.
NOTE 1 …
Marine structures — Mobile offshore units — Mooring positioning windlasses and winches
This document specifies a classification, technical requirements and test methods, as well as designation, marking and documentation requirements for mooring positioning windlasses and winches of mobile offshore floating units, including drill-ships, semi-submersible drilling rigs, production platforms and offshore accommodation platforms.
It can be used as a reference for ship-shifting…
Adhesives — Test methods for adhesives for plastic or rubber floor coverings or wall coverings — Det...
This document specifies a test method that measures the dimensional changes of a plastic or rubber floor or wall covering bonded to a given substrate after accelerated ageing. The term "wall covering" does not include any type of wallpaper.
Adhesives — Test of adhesive for floor covering — Determination of the electrical resistance of adhe...
This document specifies a test method to measure the electrical resistance as a material physical parameter of an adhesive film and composites of floor covering material and adhesive film. The electrical resistance is reciprocal to the electrical conductivity. This laboratory method does not take account of all influences which can occur in practice.
This method applies to the determination of…
