Rechercher

1.1 Généralités La présente norme traite des aspects reliés au génie géotechnique des: a) plates-formes à embase-poids; b) ouvrages auxiliaires en remblai; c) plates-formes ballastables; et d) plates-formes sur piles. Elle...

ISO/IEC 8632 provides a file format suitable for the storage and retrieval of picture description information. The file format consists of an ordered set of elements that may be used to describe pictures in a way that is...

1.1 Scope This Recommendation | International Standard specifies the system layer of the coding. It was developed principally to support the combination of the video and audio coding methods defined in Parts 2 and 3 of ISO...

Remarque : Le champ d'application de cet avis d'intention (initialement publié le 21 novembre 2023) a été mis à jour par l'OEN responsable le 4 septembre 2024. La présente norme établit les exigences minimales pour la...

La présente Recommandation Norme internationale fournit les spécifications et les directives nécessaires à l'établissement et au renseignement des formulaires MCS récapitulatif de conformité de gestion (management conformance...

1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric appliances for the care of skin or hair of persons or animals and intended for household and similar...

1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric appliances for use with aquariums and garden ponds for household and similar purposes, their rated...

1. Scope This Standard applies to the erection and use of access scaffold that is (a) supported on a surface; (b) hung from multiple points, but is not capable of moving vertically or horizontally; or (c) mounted on wheels...

This part of ISO/IEC 13818 does not change or supersede any of the requirements in ISO/IEC 13818-1. All Transport Streams, whether or not they are delivered in accordance with the RTI shall comply with ISO/IEC 13818-1. In...

La présente partie de l'ISO 12003 spécifie des modes opératoires d'essai statique et dynamique, la zone de dégagement et les conditions d'acceptation des structures de protection contre le retournement (ROPS) à deux montants...