Rechercher

​​1.1 Ces exigences couvrent les pistolets qui sont destinés à être utilisés pour le contrôle des carburants pour moteurs, comme indiqué à la section 1.3. Ils sont du type utilisé dans l’équipement de distribution des...

1.1 This Standard applies to direct plug-in nightlights not exceeding 10 W input, for indoor use only, in non-hazardous locations and intended to be used in accordance with the Canadian Electrical Code, Part I, CSA C22.1, and...

1.1 These requirements cover humidifiers rated 600 V or less, and intended to be used in accordance with the National Electrical Code (NEC), ANSI/NFPA 70, and the Rules of the Canadian Electrical Code (CEC), Part I, C22.1. 1...

This International Standard specifies a uniform representation of human sexes for the interchange of information. It is intended to - reduce the time required to record and/or format the representation of sexes and transmit...

This Standard applies to hand-held tappers and threaders. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The...

1.1 Scope 1.1.1 Equipment included in scope This part of IEC 61010 specifies general safety requirements for the following types of electrical equipment and their accessories, wherever they are intended to be used. a)...

1.1 Scope 1.1.1 Equipment included in scope This part of IEC 61010 specifies general safety requirements for the following types of electrical equipment and their accessories, wherever they are intended to be used. a)...

1.1 This Standard specifies the requirements for low-halogen belowground (Type BG) reinforced thermosetting resin conduit (RTRC) and fittings, for installation and use in accordance with CSA C22.1, Canadian Electrical Code...

1.1 This Standard applies to direct plug-in nightlights not exceeding 10 W input, for indoor use only, in non-hazardous locations and intended to be used in accordance with the Canadian Electrical Code, Part I, CSA C22.1, and...

1.1 These requirements cover liquid-tight flexible nonmetallic conduit in the 3/8 – 4 (12 – 103) trade sizes of Type LFNC-A (Layered), Type LFNC-B (Integral), and Type LFNC-C (Corrugated) constructions. The conduit is...

1.1 Cette norme couvre les raccords à libération d’urgence, les raccords pivotants et les raccords de tuyaux de type à compression sans filetage. Les raccords couverts par les présentes exigences sont destinés uniquement aux...

1.1 La présente norme s'applique aux disjoncteurs de sécurité de la classe A, individuels et triphasés destinés à la protection du personnel, destinés à être utilisés uniquement dans des systèmes neutres mis à la terre...