Rechercher

1.1 Les connecteurs de fils couverts par ces exigences sont destinés à être utilisés avec des conducteurs en cuivre conformément aux installations couvertes par le National Electrical Code, NFPA 70 ; le Code canadien de l...

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric commercial amusement machines and personal service machines, their rated voltage being not more than 250 V for...

2.1 Type of Equipment This Standard applies to welded composite enclosures of cast and wrought aluminium and aluminium alloy enclosures pressurized with dry air, inert gases, eg, sulphur hexafluoride, carbon tetrafluoride, or...

1.1 The requirements of this Standard apply to the following electrical equipment for elevators, escalators, moving walks, dumbwaiters, material lifts, and elevating devices for persons with physical disabilities (platform...

Ces exigences couvrent les ensembles complets de crépines ou de filtres autonomes destinés à être utilisés avec des liquides inflammables et combustibles désignés, de l’ammoniac anhydre (qualité engrais) et de l’eau non...

Cette norme énonce les exigences visant les chemins de câbles non métalliques et leurs accessoires conçus pour être utilisés selon le Code canadien de l'électricité (CCE), Première partie, et le National Electrical Code. (NEC...

1.1 The requirements in this standard cover sealed wire connector systems, including insulating caps, covers, resins, tubing, and tapes provided with, or for use with, specific wire connectors. These systems are intended for...

Note: Due to an SCC administrative oversight the following NOI’s title and scope were updated on November 16, 2016 in the CNS as per an outstanding request from the responsible SDO submitted on August 23, 2016. Scope 1.1...

1.1 This Standard specifies the requirements for insulating tubing that is usually round in cross-section and that consists entirely of extruded compounds whose characteristic constituents are thermosetting, elastomeric, or...

1.1 The requirements of this Standard apply to Grades A and B acrylic-polymer-coated, silicone-polymer-coated, or vinyl-polymer-coated electrical sleeving that consists of closely woven fabric made from glass (see Table 1 for...

1.1 The requirements of this Standard apply to Grades A and B acrylic-polymer-coated, silicone-polymer-coated, or vinyl-polymer-coated electrical sleeving that consists of closely woven fabric made from glass (see Table 1 for...

1.1 These requirements cover permanently installed devices, hereafter referred to as dimmers, that employ a dimming function intended for control of lighting loads of the magnetic ballast, transformer, electronic ballast...