Norme sur les plateformes mobiles automatisées

Underwriters Laboratories Inc. (UL)
Organisme d'élaboration de normes:
Underwriters Laboratories Inc.
Programme de travail:
View the UL work program
Numéro de référence:
ANSI/CAN/UL 3100
Catégorie de norme:
Norme nationale du Canada - Norme canadienne
Sous-catégorie de norme
Norme nationale canado-américaine
Type d’activité d’élaboration de normes:
Nouvelle norme
Statut:
En cours d'élaboration
Date de début de la période de commentaires OEN:
Date de fin de la période de commentaires des OEN:
Affiché le:

Porté:

Note: Title and scope updated June 9, 2020.

1  Scope

 

1.1  These requirements cover battery-operated mobile platforms with or without a payload, as specified in 1.2. These devices are intended to be used indoors only or as outdoor use devices in a commercial or industrial environment. The device is battery powered using either lead acid batteries or lithium based batteries that, if rechargeable, are charged through a conductive system while either on board or off board the device.

 

1.2  Mobile platforms that are covered by this Standard are intended to be for lifting, carrying, product picking, towing, and the like. These actions may be provided by a gripping attachment, suction attachment, scope attachment, and the like, to lift or carry the load.

 

1.3  Portions of a system, such as the charger, that are located off board the AMP, are intended to be installed in accordance with the National Electrical Code (NEC), NFPA 70 and the Canadian Electrical Code (CE Code), CSA C22.1.

 

1.4  This Standard does not include requirements for industrial robots, which are covered under the Standard for Robots and Robotic Equipment, UL 1740 and Industrial Robot and Robot Systems, CSA Z434. A robotic manipulator that is in compliance with these standards may be used as the payload for the integrated system.

 

1.5  This Standard does not include requirements for Automatic Guided Vehicles or Automated Vehicles that function as commercial and industrial floor cleaning equipment. This equipment is covered under the standard for Particular Requirements for Rechargeable Battery-Operated Commercial Robotic Floor Treatment Machines with Traction Drives, ANSI C22.2 No. 336.

 

1.6  This Standard does not cover battery powered industrial trucks that are rated Type E, EE, ES, or EX, and marked as such, as defined in the Fire Safety Standard for Powered Industrial Trucks Including Type Designations, Areas of Use, Conversions, Maintenance, and Operations, NFPA 505. These truck types are covered under the Standard for Electric-Battery-Powered Industrial Trucks, UL 583 and the Guide for the Investigation of Electric-Battery-Powered Industrial Trucks, ULC/ORD-C583.

 

1.7 This standard does not cover products intended to transport persons.

 

Raison d’être du projet

To develop a Joint Canada-United States National Standard for Automated Mobile Platforms (AMPs).

Note : L’information ci-dessus a été recueillie et est diffusée par le Conseil canadien des normes (CCN) pour les besoins de son système de notification centralisé et transparent pour l’élaboration de nouvelles normes. Le système permet aux organismes d’élaboration de normes (OEN) accrédités par le CCN et aux membres du public d’être informés des nouveaux travaux d’élaboration de normes au Canada. Il donne aussi aux OEN accrédités la possibilité de repérer et de résoudre les cas de doubles emplois éventuels dans les normes et les travaux de normalisation.

Les OEN sont eux-mêmes responsables du contenu et de l’exactitude de l’information présentée ici. Cette information n’existe que dans la langue dans laquelle elle a été fournie au CCN.