Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 1 : Règles generals

Logo
CSA Group
Organisme d'élaboration de normes:
Programme de travail:
Numéro de référence:
CAN/CSA-C22.2 NO. 62841-1:15
Catégorie de norme:
Norme nationale du Canada - Norme canadienne
Type d’activité d’élaboration de normes:
Révision/Modification
Statut:
En cours d'élaboration
Date de début de la période de commentaires OEN:
Date de fin de la période de commentaires des OEN:
Affiché le:

Porté:

Champ d’application

This International Standard deals with the safety of electric motor-operated or magnetically driven:


  • - HAND-HELD TOOLS (IEC 62841-2);

    - TRANSPORTABLE TOOLS (IEC 62841-3);

    - LAWN AND GARDEN MACHINERY (IEC 62841-4).

The above listed categories are hereinafter referred to as "tools" or "machines".

The RATED VOLTAGE is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The RATED INPUT is not more than 3 700 W.

The limits for the applicability of this standard for battery tools are given in K.1 and L.1.

This standard deals with the hazards presented by tools which are encountered by all persons in the NORMAL USE and reasonably foreseeable misuse of the tools.

Tools with electric heating elements are within the scope of this standard.

Requirements for motors not isolated from the supply, and having BASIC INSULATION not designed for the RATED VOLTAGE of the tools, are given in Annex B. Requirements for rechargeable battery-powered motor-operated or magnetically driven tools and the battery packs for such tools are given in Annex K. Requirements for such tools that are also operated and/or charged directly from the mains or a non-isolated source are given in Annex L.

Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a HAND-HELD TOOL and a support is considered to be a TRANSPORTABLE TOOL and thus covered by the relevant Part 3.

This standard does not apply to:


  • - tools intended to be used in the presence of explosive atmosphere (dust, vapour or gas);

    - tools used for preparing and processing food;

    - tools for medical purposes;

    NOTE 1 IEC 60601 series covers a variety of tools for medical purposes.

    • - tools intended to be used with cosmetics or pharmaceutical products;

      - heating tools;

Note : L’information ci-dessus a été recueillie et est diffusée par le Conseil canadien des normes (CCN) pour les besoins de son système de notification centralisé et transparent pour l’élaboration de nouvelles normes. Le système permet aux organismes d’élaboration de normes (OEN) accrédités par le CCN et aux membres du public d’être informés des nouveaux travaux d’élaboration de normes au Canada. Il donne aussi aux OEN accrédités la possibilité de repérer et de résoudre les cas de doubles emplois éventuels dans les normes et les travaux de normalisation.

Les OEN sont eux-mêmes responsables du contenu et de l’exactitude de l’information présentée ici. Cette information n’existe que dans la langue dans laquelle elle a été fournie au CCN.