Conception et installation de systèmes de pompe à chaleur géothermique pour les bâtiments commerciaux et résidentiels

ANSI/CSA/IGSHPA C448.3-16 - Installation of vertical configured closed- loop ground source heat pump systems 

Scope

1.1
This Standard applies to vertical closed-loop ground heat exchangers that are to be connected to a ground source heat pump system and used as a thermal source or sink for heating and cooling applications. Vertical closed-loop ground heat exchangers that are intended for connection to a direct expansion ground source heat pump are covered under ANSI/CSA C448.8. 

1.2
This Standard also applies to the vertical closed-loop ground heat exchanger portion of a thermal energy storage system. 

1.3
This Standard covers the minimum requirements for site survey, material selections, installation, testing and verification, documentation, commissioning, and decommissioning. 

1.4
The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only. 

1.5
In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard. 

Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. 

Notes to tables and figures are considered part of the table or figure and may be written as requirements. 

Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application. 
-----------------------------------------------------------------------------------------------------------------------------
ANSI/CSA/IGSHPA C448.4-16 - Installation of horizontal configured closed-loop ground source heat pump systems 

Scope

1.1
This Standard applies to horizontal closed-loop ground heat exchangers that are to be connected to a ground source heat pump system and used as a thermal source or sink for heating and cooling applications. 

1.2
This Standard also applies to the horizontal closed-loop ground heat exchanger portion of a thermal energy storage system. 

1.3
This Standard covers the minimum requirements for site survey, material selections, installation, testing and verification, documentation, commissioning, and decommissioning. 

1.4
The values given in SI (metric) units are the standard. The values given in the parentheses are for information only. 

1.5
In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard. 

Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. 

Notes to tables and figures are considered part of the table or figure and may be written as requirements. 

Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application. 
--------------------------------------------------------------------------------------------------------------------------------------
ANSI/CSA/IGSHPA C448.5-16 - Installation of surface water (including submerged exchangers) heat pump systems 

Scope

1.1
This Standard applies to submerged closed loop heat exchangers, which are to be connected to a ground source heat pump system and used as a thermal source or sink for heating and cooling applications. 

1.2
This Standard covers the minimum requirements for the site survey, material selections, installation, testing and verification, documentation, commissioning, and decommissioning. 

1.3
The values given in SI (metric) units are the standard. The values given in the parentheses are for information only. 

1.4
In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard. 

Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. 

Notes to tables and figures are considered part of the table or figure and may be written as requirements. 

Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application. 
-----------------------------------------------------------------------------------------------------------------------------------------------
ANSI/CSA/IGSHPA C448.6-16 - Installation of open ground water systems 

Scope

1.1
This Standard applies to open-loop heat exchangers which are to be connected to a ground source heat pump system and used as a thermal source or sink for heating and cooling applications. 

1.2
This Standard covers the minimum requirements for site survey, material selections, installation, testing and verification, documentation, commissioning, and decommissioning. 

1.3
The values given in SI (metric) units are the standard. The values given in the parentheses are for information only. 

1.4
In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard. 

Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. 

Notes to tables and figures are considered part of the table or figure and may be written as requirements. 

Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application. 
-----------------------------------------------------------------------------------------------------------------------------------------------
ANSI/CSA/IGSHPA C448.7-16 - Installation of standing column well heat pump systems 

Scope

1.1
This Standard applies to standing column well (SCW) heat exchangers which are to be connected to a ground source heat pump system and used as a thermal source or sink for heating and cooling applications. 

1.2
This Standard also applies to the standing column well heat exchanger portion of a thermal energy transfer system. 

1.3
This Standard covers the minimum requirements for site survey, material selections, installation, testing and verification, documentation, commissioning, and decommissioning. 

1.4
In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard. 

Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. 

Notes to tables and figures are considered part of the table or figure and may be written as requirements. 

Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application. 
--------------------------------------------------------------------------------------------------------------------------------------------
ANSI/CSA/IGSHPA C448.8-16 - Installation of direct expansion heat pump systems 

Scope

1.1
This Standard applies to direct expansion ground source heat pumps for systems using ground heat exchangers as a thermal source or sink for heating and cooling, with or without a supplementary heating source. 

1.2
This Standard applies to new and retrofit installations. 

1.3
This Standard covers the minimum requirements for site surveys, material selections, installation, testing and verification, documentation, commissioning, and decommissioning. 

1.4
This Standard applies for commercial, institutional, and residential applications. 

1.5
The values given in SI (metric) units are the standard. The values given in the parentheses are for information only. 

1.6
In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard. 

Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. 

Notes to tables and figures are considered part of the table or figure and may be written as requirements. 

Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.