Compatibilité électromagnétique des équipements multimédia - Exigences d’émission

Logo
CSA Group
Organisme d'élaboration de normes:
Programme de travail:
Numéro de référence:
CAN/CSA-CISPR 32:17
Catégorie de norme:
Norme nationale du Canada - Adoption d'une Norme internationale
Type d’activité d’élaboration de normes:
Révision/Modification
Code ICS:
33.100.10
Statut:
En cours d'élaboration
Date de début de la période de commentaires OEN:
Date de fin de la période de commentaires des OEN:
Affiché le:

Porté:

Champ d’application

NOTE Blue coloured text within this document indicates text that will be aligned with the future MME immunity publication CISPR 35.

This International Standard applies to multimedia equipment (MME) as defined in 3.1.24 and having a rated r.m.s. AC or DC supply voltage not exceeding 600 V.

MME intended primarily for professional use is within the scope of this publication.

The emission requirements in this standard are not intended to be applicable to the intentional transmissions from a radio communication device operated in accordance with the ITU-R Radio Regulations, nor to any spurious emissions related to these intentional transmissions.

Equipment, for which emission requirements in the frequency range covered by this publication are explicitly formulated in other CISPR publications is excluded from the scope of this publication.

In-situ testing is outside the scope of this publication.

This publication covers two classes of MME (Class A and Class B). The MME classes are specified in Clause 4.

The objectives of this publication are:

1) to establish requirements which provide an adequate level of protection of the radio spectrum, allowing radio services to operate as intended in the frequency range 9 kHz to 400 GHz;

2) to specify procedures to ensure the reproducibility of measurement and the repeatability of results.

Raison d’être du projet

Raison d’être du projet
The primary objective of the standard is to maintain alignment with international requirements. This proposed Amendment is being developed at the request of the EMC Committee. It will provide the industry with alignment with the latest international requirements.

Note : L’information ci-dessus a été recueillie et est diffusée par le Conseil canadien des normes (CCN) pour les besoins de son système de notification centralisé et transparent pour l’élaboration de nouvelles normes. Le système permet aux organismes d’élaboration de normes (OEN) accrédités par le CCN et aux membres du public d’être informés des nouveaux travaux d’élaboration de normes au Canada. Il donne aussi aux OEN accrédités la possibilité de repérer et de résoudre les cas de doubles emplois éventuels dans les normes et les travaux de normalisation.

Les OEN sont eux-mêmes responsables du contenu et de l’exactitude de l’information présentée ici. Cette information n’existe que dans la langue dans laquelle elle a été fournie au CCN.