Appareils électromédicaux - Partie 2-85: Exigences particulières pour la sécurité de base et les performances essentielles des oxymètres de tissus cérébraux (t-NIRS)

This particular standard applies to basic safety and essential performance of cerebral tissue oximeter equipment, that employs light at multiple wavelengths to derive a quantitative measure of oxygen saturation of haemoglobin within the volume of tissue sampled under the probe attached to the head. The cerebral tissue oximeter equipment can be based on continuous light, frequency domain or time domain technologies. This particular standard applies to ME equipment used in a hospital environment as well as when used outside the hospital environment, such as in ambulances and air transport. Additional standards may apply to ME equipment for those environments of use.

NOTE 1 Cerebral tissue oximeters are sometimes referred to as near infrared spectroscopy equipment.

Not included within the scope of this particular standard are:

-              invasive tissue or vascular oximeters

-              oximeters that require a blood sample from the patient

-              devices measuring dissolved oxygen

-              ME equipment, or part thereof, that measures path-length-dependent haemoglobin change. The requirements for functional near-infrared spectroscopy equipment are found in ISO 80601-2-71.

-              ME equipment, or part thereof, that measures arterial saturation based on pulsatile changes in tissue optical properties (SpO2). The requirements for pulse oximeter equipment are found in ISO 80601-2-61.

-              ME equipment, or part thereof, that claims to monitor tissue in other parts of the 162 body other than head.

These requirements also apply to cerebral tissue oximeter equipment, including cerebral tissue oximeter monitors, cerebral tissue oximeter probes and probe cable extenders, which have been reprocessed.

This document is not applicable to cerebral tissue oximeter equipment intended for use in laboratory research applications.

If a clause or subclause is specifically intended to be applicable to ME equipment only, or to ME systems only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME equipment and to ME systems, as relevant. Hazards inherent in the intended physiological function of ME equipment or ME systems within the scope of this document are not covered by specific requirements in this document except in 201.11 and in 7.2.13 and 8.4.1 of the general standard.

NOTE 2 See also 4.2 of the general standard. “The general standard” is IEC 60601-1:2005+AMD1:2012, Medical electrical equipment – Part 1: General requirements for basic safety and essential performance.

This document can also be applied to ME equipment and their accessories used for compensation or alleviation of disease, injury or disability.

This document is not applicable to remote or slave (secondary) equipment that displays StO2 178 values that are located outside of the patient environment.

NOTE 3 ME equipment that provides selection between diagnostic and monitoring functions is expected to meet the requirements of the appropriate document when configured for that function.

This document is a particular standard in the IEC 60601-1 and ISO/IEC 80601 series of standards