Industrial trucks — Safety requirements and verification — Part 2: Self-propelled variable-reach tru...
This document gives safety requirements and the means for their verification for self-propelled industrial variable-reach trucks and variable-reach container handlers/reach stackers as defined in ISO 5053‑1 (hereafter referred to as trucks), equipped with forks or integral load-handling devices for normal industrial duties (e.g. fork arms or means, such as spreaders, for handling containers).…
Chariots de manutention — Exigences de sécurité et vérification — Partie 2: Chariots automoteurs à p...
Le présent document définit les exigences de sécurité ainsi que leurs moyens de vérification pour les chariots de manutention automoteurs à portée variable et les chariots porte-conteneur à portée variable/gerbeurs à portée variable tels que définis dans l’ISO 5053‑1 (ci-après désignés chariots), équipés de fourches ou de dispositifs complets de manutention de la charge pour des activités…
Rendement énergétique des systèmes de fenêtrage/Guide d’utilisation de CSA A440.2:22, Rendement éner...
1 Domaine d’application
1.1 Généralités
Cette norme vise :
a)
tous les systèmes de fenêtrage régis par AAMA/WDMA/CSA 101/I.S.2/A440, y compris :
i)
les fenêtres à guillotine;
ii)
les fenêtres coulissantes;
iii)
les fenêtres oscillo-battantes;
iv)
les fenêtres à battants, fixes et ouvrantes;
v)
les fenêtres basculantes (à soufflet ou à auvent);
vi)
les fenêtres fixes;
vii)
les…
Frames and covers for maintenance holes and catchbasins
1 Scope
1.1 General
This Standard applies to frames and covers for maintenance holes and catchbasins.
1.2 Terminology
In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an…
Definitions, general requirements, and methods of testing for thermoplastic pressure piping
1 Scope
1.1 Scope of this Standard
This Standard specifies requirements for thermoplastic pressure piping. It includes reference publications, definitions, abbreviations, general requirements for materials and manufactured pipe and fittings, relevant test methods, and marking requirements.
Notes:
1)
The terms “pipe” and “piping”, as well as “tube” and “tubing”, are used interchangeably in…
Polyethylene (PE) pipe, tubing, and fittings for cold-water pressure services
1 Scope
1.1 General
This Standard covers polyethylene (PE) pipe and tubing, and fittings for use in transporting potable or non-potable water, or other applications such as wastewater forcemains, reclaimed water, conduit, golf or commercial irrigation, or water-based ground source geothermal systems, in either buried or above- ground installations.
1.2 Requirements
This Standard specifies…
Polyvinylchloride (PVC) injection- moulded gasketed fittings for pressure applications
1 Scope
1.1 General
This Standard covers rigid polyvinylchloride (PVC) injection-moulded fittings that have gasketed joints and are intended for use in pressure applications such as water mains, water service piping, process piping, and fire lines. Fittings covered by this Standard are suitable for use with PVC pipes having outside diameter dimensions of cast iron pipe. Only one pressure rating…
