Rechercher

This document specifies requirements for classification of wire electrodes, wires, rods and all-weld metal deposits in the as-welded condition and in the post-weld heat-treated (PWHT) condition for gas shielded metal arc welding and tungsten inert-gas welding of high-strength steels with a minimum yield strength greater than 500 MPa, or a minimum tensile strength greater than 570 MPa. One wire…

This document specifies requirements for classification of wire electrodes, wires and rods for gas shielded metal arc welding and tungsten inert-gas welding of creep-resisting steels, and for their deposits in the as-welded or post-weld heat-treated condition. One wire electrode can be tested and classified with different shielding gases. This document is a combined specification providing for…

Le présent document spécifie les exigences relatives à la classification des fils-électrodes, des fils et des baguettes pour le soudage à l'arc avec électrode fusible sous protection gazeuse et pour le soudage TIG des aciers résistant au fluage, ainsi que pour leurs dépôts à l'état brut de soudage ou après traitement thermique après soudage. Un fil-électrode peut être soumis aux essais…

This document provides recommendations and requirements for the design, development, use and maintenance of biometric identification systems involving passive capture subjects, including pre- and post-deployment evaluation. While the emphasis is on surveillance systems, this document is also applicable to other types of biometric identification systems involving passive capture subjects,…

This document defines test methods which are specific to proximity cards and objects, proximity coupling devices and proximity extended devices, defined in ISO/IEC 14443-1, ISO/IEC 14443-2, ISO/IEC 14443-3 and ISO/IEC 14443-4. NOTE Test methods defined in this document are intended to be performed separately. A given proximity card or object, proximity coupling device or proximity…

IEC 62391-2:2025 applies to electric double-layer capacitors for power application. Electric double-layer capacitors for power are intended for applications that require discharge currents in the range from mA to A. The characteristics of the capacitors include such performance as relatively high capacitance and low internal resistance, which is applicable to Class 3 and Class 5 of the…

L’IEC 62391-2:2025 s’applique aux condensateurs électriques à double couche pour application de puissance. Les condensateurs électriques à double couche pour application de puissance sont destinés aux applications qui exigent des courants de décharge dans la gamme des milliampères aux ampères. Les caractéristiques des condensateurs incluent des performances comme une capacité relativement élevée…

This document specifies the fundamental deviations and limits of sizes for the pitch and minor diameters of ISO general purpose metric internal threads (M) conforming to ISO 262 (M6 to M68 with the coarse pitches and M72 to M100 with pitch 6) having basic and design profiles in accordance with ISO 68-1. This document is applicable to the metric internal threads oversized to tolerance class 6AZ or…

This document specifies the fundamental deviations and limits of sizes for the pitch and major diameters of the hot-dip galvanized metric external threads (M) conforming to ISO 262 (M6 to M68 with the coarse pitches and M72 to M100 with pitch 6) having basic and design profiles in accordance with ISO 68-1. This document is applicable to the hot-dip galvanized metric external threads undersized to…

Le présent document spécifie les écarts fondamentaux et les dimensions limites des diamètres sur flancs et intérieurs des filetages intérieurs métriques (M) ISO pour usages généraux conformes à l’ISO 262 (M6 à M68 à pas gros et M72 à M100 avec pas de 6), de profil de base et de profil nominal conforme à l'ISO 68-1. Le présent document s'applique aux filetages intérieurs métriques sur-…