Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistance à l'abrasion à l'...
Le présent document spécifie deux méthodes de détermination de la résistance du caoutchouc à l'abrasion à l'aide d'un dispositif à tambour tournant.
Les méthodes consistent à déterminer la perte de volume d'une éprouvette de caoutchouc soumise à une action abrasive par frottement sur une qualité spécifiée de toile abrasive. La méthode A utilise une éprouvette fixe et la…
Carbonaceous materials used in the production of aluminium — Cold and tepid ramming pastes — Determi...
This document describes a method of producing a compaction curve indicating the rammability of carbonaceous ramming pastes used to line cathodes utilized in the production of aluminium.
Determination of the rammability enables a ramming paste with the optimum density to be selected.
Carbonaceous materials used in the production of aluminium — Cold and tepid ramming pastes — Prepara...
This document describes the preparation of unbaked test specimens made by compacting carbonaceous ramming pastes. This document also includes a method for determination of the apparent density after compaction.
Unbaked test specimens of ramming paste are not only prepared for determination of the apparent density of the paste after compaction, but also for the determination of the dimensional…
1 Scope
1.1 These requirements cover Original Equipment Manufacturer (OEM) and non-OEM crimp tools that
have been evaluated for use with the following types of specified connecting devices:
a) Grounding and bonding equipment;
b) Electrical quick-connect terminals;
c) Wire connectors;
d) Wire-connector adapters;
e) Ferrules; and
f) Lightning protection components.
These crimp tools are…
Test methods for hydrogen fuelling parameter evaluation
1 Scope
1.1 Inclusions
This Standard specifies the minimum testing requirements for verifying the fuelling protocols specified in SAE J2601 and the communications protocols in SAE J2799.
This Standard applies to dispensing systems, referred to as “dispensers”, designed to fill vehicle storage systems in accordance with SAE J2601.
Notes:
1)
The SAE J2601 fuelling protocols target rapid fills…
Medical electrical equipment — Part 2-46: Particular requirements for the basic safety and essential...
Scope
Replacement:
This part of IEC 60601 specifies safety requirements for OPERATING TABLES, whether or not
having electrical parts, including TRANSPORTERS, used for the transportation of the OPERATING
TABLE top to or from the base or pedestal of an OPERATING TABLE with detachable OPERATING
TABLE top.
NOTE See also IEC 60601-1:2005, IEC 60601-1:2005/AMD1:2012 and IEC 60601-1:2005/AMD2:2020…
Medical electrical equipment — Part 2-84: Particular requirements for the basic safety and essential...
Scope
Replacement:
NOTE 1 There is guidance or rationale for this subclause contained in Clause AA.2.
This document applies to the basic safety and essential performance of an EMS ventilator in combination
with its accessories, hereafter also referred to as ME equipment:
? intended for patients who need differing levels of support from artificial ventilation including
ventilator-dependent…
Appareils électromédicaux — Partie 2-84 : Exigences particulières relatives à la sécurité de base et...
Domaine d'application
Remplacement:
NOTE 1 L'Article AA.2 contient des recommandations ou justifications concernant le présent paragraphe.
Le présent document s'applique à la sécurité de base et aux performances essentielles d'un ventilateur SMU
associé à ses accessoires, appelés ci-après appareil EM:
? destinés aux patients ayant besoin de différents niveaux d'…
Coastal flood risk assessment for buildings and infrastructure
1 Scope
1.1 Inclusions
This Standard applies to coastal flood risk assessments for communities, buildings, and infrastructure in
Canada. The outcomes of such assessments are intended to inform the design of new buildings and
infrastructure, and retrofitting measures for existing buildings and infrastructure.
The Standard identifies
a) a framework for conducting coastal flood hazard and risk…
Évaluation des risques d’inondation côtière pour les bâtiments et les infrastructures
1 Domaine d’application
1.1 Inclusions
Cette norme s’applique à l’évaluation du risque d’inondation côtière pour les communautés, les
bâtiments et les infrastructures au Canada. Les résultats de ces évaluations sont destinés à éclairer la
conception des nouveaux bâtiments et infrastructures, ainsi que les mesures de modernisation des
bâtiments et infrastructures existants.
La norme définit…
