Machines à bois — Sécurité — Partie 10: Scies de chantier
L'ISO 19085-10:2018 donne les exigences et les mesures de sécurité pour les scies de chantier transportables, conçues pour la coupe de bois et de matériau ayant des caractéristiques physiques similaires à celles du bois, ci-après désignées «machines».
NOTE 1 Pour la définition de machine transportable, voir l'ISO 19085‑1:2017, 3.5.
L'ISO 19085-10:2018 traite de tous les…
Récipients cryogéniques — Dispositifs de sécurité pour le service cryogénique — Partie 3: Déterminat...
ISO 21013-3:2016 établit des méthodes de calcul distinctes permettant de déterminer le débit massique à décharger pour chacune des conditions spécifiées suivantes:
- récipients isolés sous vide comportant un système d'isolation (enveloppe extérieure + matériau isolant) intact sous vide normal, enveloppe extérieure à température ambiante, récipient intérieur à la température du contenu à la…
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (sal...
ISO 11997-1:2017 specifies a method for the determination of the resistance of coatings to one of four defined cycles of wet (salt fog)/dry/humid conditions using specified solutions.
Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface fo...
ISO 10110-5:2015 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection.
ISO 10110-5:2015 specifies rules for indicating the tolerance for surface form deviation.
NOTE The terminology of interferometry employing the unit "fringe spacings" is widely used for the specification of…
Optics and photonics — Measurement of optical elements and optical systems — Part 4: Interpretation ...
ISO 14999-4:2015 applies to the interpretation of interferometric data relating to the measurement of optical elements.
ISO 14999-4:2015 gives definitions of the optical functions and values specified in the preparation of drawings for optical elements and systems, made in accordance with ISO 10110‑5 and/or ISO 10110‑14 for which the corresponding nomenclature, functions, and values are listed in…
Condition monitoring and diagnostics of machines — Ultrasound — General guidelines, procedures and v...
ISO 29821:2018
- gives guidelines for establishing severity assessment criteria for anomalies identified by airborne (AB) and structure-borne (SB) ultrasound,
- specifies methods and requirements for carrying out ultrasonic examination of machines, including safety recommendations and sources of error, and
- provides information relative to data interpretation, assessment criteria and reporting.
Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 4: Determ...
This part of ISO 12966 specifies a method for the determination of fatty acid methyl esters (FAMEs) derived by transesterification or esterification from fats, oils, and fatty acids by capillary gas chromatography (GLC). Fatty acid methyl esters from C4 to C24 can be separated using this part of ISO 12966 including saturated fatty acid methyl esters, cis- and trans-monounsaturated fatty acid…
Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of total ...
ISO 26603:2017 specifies the determination of the total chlorine content of aromatic isocyanates used in the preparation of polyurethanes. The difference between the total chlorine content and the hydrolyzable chlorine content (see ISO 15028) is a measure of the process solvents left in the product. Both test methods are applicable to a variety of organic compounds, including aliphatic…
