1 Domaine d’application
1.1 Ces exigences couvrent les tuyaux flexibles métalliques fournis avec deux raccords, un à chaque
extrémité, qui facilitent le raccordement sans qu’il faille tordre le tuyau. Les tuyaux sont dotés d’un centre
en métal ondulé ou d’un centre intérieur non métallique recouvert d’une tresse en acier inoxydable. Leur
diamètre intérieur nominal ne dépasse pas 4 po (101 mm…
Lead-acid starter batteries - Part 2: Dimensions of batteries and dimensions and marking of terminal...
IEC 60095-2:2021 is applicable to lead-acid batteries used for starting, lighting and ignition of passenger cars and light vehicles with a nominal voltage of 12 V.
All batteries in accordance with this document can be fastened to the vehicle either by means of the ledges around the container or by means of a hold-down device engaging with the lid.
This document specifies dimensions of battery…
Information technology - Top-level ontologies (TLO) - Part 1: Requirements
This document specifies required characteristics of a domain-neutral top-level ontology (TLO) that can be used in tandem with domain ontologies at lower levels to support data exchange, retrieval, discovery, integration and analysis.
If an ontology is to provide the overarching ontology content that will promote interoperability of domain ontologies and thereby support the design and use of…
Information technology — Top-level ontologies (TLO) — Part 1: Requirements
This document specifies required characteristics of a domain-neutral top-level ontology (TLO) that can be used in tandem with domain ontologies at lower levels to support data exchange, retrieval, discovery, integration and analysis.
If an ontology is to provide the overarching ontology content that will promote interoperability of domain ontologies and thereby support the design and use of…
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines — P...
This document provides a scheme for the assessment of conformity of RFC products for the rehabilitation of existing pipelines, in accordance with the applicable parts of ISO 11296, ISO 11297 and ISO 11298, and intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of certification procedures.
It applies to cured-in-place pipe…
Conception de l'environnement des bâtiments — Systèmes intégrés de chauffage et de refroidissem...
Le présent document définit une méthode de conception et de dimensionnement de systèmes permettant de garantir la puissance calorifique et frigorifique des systèmes de chauffage et de refroidissement par rayonnement.
Conception de l'environnement des bâtiments — Systèmes intégrés de chauffage et de refroidissem...
Le présent document permet de calculer la puissance frigorifique de pointe de systèmes thermoactifs (TABS) en se fondant sur les apports de chaleur, tels que les apports solaires, les apports de chaleur internes et la ventilation, ainsi que de calculer la demande en puissance frigorifique côté eau, afin de les utiliser pour dimensionner le système de refroidissement en ce qui concerne les…
Building environment design — Embedded radiant heating and cooling systems — Part 4: Dimensioning an...
This document allows the calculation of peak cooling capacity of Thermo Active Building Systems (TABS) – Type V according to ISO 11855-1, based on heat gains, such as solar gains, internal heat gains, and ventilation, and the calculation of the cooling power demand on the water side, to be used to size the cooling system, as regards, e.g. the chiller size, fluid flow rate.
This document defines a…
Building environment design — Embedded radiant heating and cooling systems — Part 3: Design and dime...
This document establishes a system design and dimensioning method to ensure the heating and cooling capacity of the radiant heating and cooling systems.
Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with ...
IEC 62742:2021 specifies minimum requirements for emission, immunity and performance criteria regarding electromagnetic compatibility (EMC) of electrical and electronic equipment for ships with non-metallic hull.
NOTE Requirements for metallic hull are given by IEC 60533. This documents acts an extension of IEC 60533 to cater for EMC effects on non-metallic hull.
This document further gives…
