1 Scope
1.1 Application
This Standard applies to
a)
complete vent (flue) -connected or direct-vent connected, oil-fired steam, and hot-water boilers that are provided with automatic control devices;
b)
oil-fired steam and hot-water condensing boilers;
c)
boilers having an input of less than 117.2 kW (400 000 Btu/h);
d)
low-pressure boilers (as defined in Clause 3) having an input of 117…
Oil-fired service water heaters for domestic hot water, space heating, and swimming pools
1 Scope
1.1 Intent
This Standard applies to complete flue-connected, oil-fired service water heaters that are provided with automatic control devices. These service water heaters may be used both for heating and for supplying of domestic hot water. They are not intended to be used as sole-source heating appliances.
1.2 Application
The requirements in this Standard apply to
a)
service water…
Entreposage, manutention et distribution des carburants aviation dans les aérodromes
Domaine d’application
1.1 Généralités
Cette norme prescrit les exigences minimales en matière de conception, construction, exploitation, entretien et interventions en cas d’urgence pour l’entreposage, la manutention et la distribution des carburants aviation dans les aérodromes.
1.2 Inclusions
Cette norme énonce des exigences visant à :
a)
assurer la sécurité des employés des aérodromes et…
1 Scope
1.1
This Standard provides procedures for evaluating polymeric materials and parts made from polymeric materials intended for application in electrical equipment covered by the Canadian Electrical Code, Part II (CE Code, Part II), with respect to:
a)
flammability;
b)
mechanical properties;
c)
thermal properties;
d)
resistance to weathering; and
e)
electrical properties.
1.2…
1 Scope
1.1 Inclusions
This Standard specifies design and performance requirements for floor drains, adjustable floor drains, and area drains that are used inside of, or adjacent to, building structures. Drains of outlet NPS-2 and smaller, intended only for installation in shower areas, are covered in this Standard and in ASME A112.18.2/CSA B125.2 as well.
1.2 Exclusions
This Standard does…
1 Scope
1.1 Inclusions
This Standard specifies design and performance requirements for roof drains. This Standard applies to the following types of roof drains:
a)
general purpose;
b)
gutter and cornice;
c)
parapet and promenade;
d)
balcony; and
e)
deck.
1.2 Exclusions
This standard does not apply to siphonic roof drains covered under ASME A112.6.9/CSA B79.9.
1.3 Illustrations…
1 Scope
1.1 Inclusions
This Standard covers sanitary floor sinks and specifies requirements for materials, construction, inspection, testing, and marking.
Note: In this Standard, sanitary floor sinks are generally referred to as “floor sinks”.
1.2 Exclusions
This Standard does not include floor drains covered in ASME A112.6.3/CSA B79.3.
1.3 Terminology
In this Standard, “shall” is used to…
1 Scope
1.1 Inclusions
This Standard specifies design and performance requirements for trench drains, utility channels, and grate systems that are used inside of, or adjacent to, building structures that are typically non- residential.
Note: These channels are not typically subject to high-speed vehicles but can be subjected to concentrated heavy loads such as hard-wheeled forklifts.
1.2…
1 Scope
1.1 Inclusions
This Standard specifies minimum requirements for the design, installation, examination, and testing of siphonic roof drains. It includes definitions of terms and parameters involved in the design of siphonic drainage systems.
This Standard applies to roof drains designed and manufactured for installation in piping systems that are intended to operate under depressurized…
1 Scope
1.1 Inclusions
This Standard covers cleanouts, including floor and wall types, used in concealed piping in and adjacent to residential, commercial, industrial, institutional, and other buildings open to the public.
1.2 Illustrations
Figure 1 included in this Standard is intended only to describe and portray typical floor and wall type cleanouts and is not intended to restrict design…
