Rechercher

1 Scope 1.1 This Standard applies to extra-low-voltage landscape lighting systems and associated components that are intended for cord-connected, direct plug-in, or permanent connection to a branch circuit of not more than 150 volts-to-ground in accordance with the Canadian Electrical Code, Part I. 1.2 This Standard only covers extra-low-voltage landscape lighting systems where the maximum…

1 Scope 1.1 Inclusions This Standard applies to the following electrically driven, mechanical, vapour compression-type systems: a) factory-made commercial and industrial unitary air-cooled air conditioners and heat pumps rated above 19 kW (65 000 Btu/h) cooling capacity at standard rating conditions for both single- and three-phase electrical power supplies; b) factory-made commercial and…

1 Scope 1.1 Fire-performance and antistatic requirements This Standard specifies fire-performance and antistatic requirements for new (unused) conveyor belting for use in any part of a mining or excavation operation that is below the surface. 1.2 Types of fire-performance and antistatic conveyor belting This Standard covers fire-performance and antistatic conveyor belting of the following…

1 Scope 1.1 Inclusions This Standard applies to newly-produced, hand-operated quick-disconnect devices, sizes NPS 1/8 in to 1-1/2 in, hereinafter also referred to as devices, constructed entirely of new, unused parts and materials which provide a means for connecting and disconnecting appliances or appliance connectors to gas supplies, and which are for indoor and outdoor applications. These…

Scope This National Standard of Canada describes two grades of propane used for fuel purposes. These grades consist mainly of hydrocarbons containing three carbon atoms. Grade 1 is intended for use in internal combustion engines and for general industrial and commercial fuel applications. Grade 1 maintains a minimum octane quality by limiting concentrations of low-octane components (see 6.5…

This document provides definitions, symbols, mechanical requirements, certification test procedure, electronic subsystem requirements and user’s manual for advanced pedestrian legform impactor (aPLI), a standardized pedestrian legform impactor with an upper mass for pedestrian subsystem testing of road vehicles. It is applicable to impact tests involving: —     vehicles of category M1, except…

This document gives general guidance for the stages in the life cycle of a system’s biometric and associated elements. This covers the following: — the capture and design of initial requirements, including legal frameworks; — development and deployment; — operations, including enrolment and subsequent usage; — interrelationships with other systems; — related data storage and…

This document gives general guidance for the stages in the life cycle of a system’s biometric and associated elements. This covers the following: —     the capture and design of initial requirements, including legal frameworks; —     development and deployment; —     operations, including enrolment and subsequent usage; —     interrelationships with other systems; —     related data storage and…

IEC 62885-4:2020+AMD1:2023 is applicable to measurements of the performance of cordless dry vacuum cleaners for household use or under conditions similar to those in households. The results obtained under this document are intended to be comparable to the results obtained under IEC 62885-2 for mains-connected vacuums. The purpose of this document is to specify essential performance…

This document presents specific characteristics of industrial internet platforms (IIPs), including related security threats, context-specific security control objectives and security controls. This document covers specific security concerns in the industrial context and thus complements generic security standards and reference models. In particular, this document includes secure data collection…