Rechercher

A440.2-14 - Fenestration energy performance Scope 1.1 This Standard applies to (a) fenestration systems covered by AAMA/WDMA/CSA 101/I.S.2/A440, including (i) vertically sliding windows; (ii) horizontally sliding windows; (iii) dual-action windows; (iv) casement windows, both fixed and operable; (v) projecting (awning/hopper) windows; (vi)…

ISO 16730‑1 describes what the contents of a technical documentation and of a user's manual should be for an assessment, if the application of a calculation method as engineering tool to predict real-world scenarios leads to validated results. The purpose of ISO/TR 16730-3:2013 is to show how ISO 16730‑1 is applied to a calculation method, for a specific example. It demonstrates how…

ISO/PAS 12835:2013 is intended for assessment of casing connections for those field applications in which the design of the casing-connection system is strain-based, and in which primary axial loading is on the casing-connection system driven by constrained thermal expansion, and in which that primary loading exceeds the casing-connection system's yield envelope. Consequently, ISO/PAS 12835:…

IEC 60684-3-216:2001+A1:2005+A2:2013 Gives the requirements for four types of heat-shrinkable, flame-retarded, limited-fire-hazard sleeving with a thermal endurance rating of 105 °C as shown below: Class A: thin wall, shrink ratio 2:1, internal diameter up to 102,0 mm; Class B: medium wall, shrink ratio 2:1, internal diameter up to 60,0 mm; Class C: thick wall, shrink ratio 2:1, internal…

IEC 60819-3-4:2013 specifies requirements for two types of aramid fibre paper containing mica particles and designated as PAaM: - type 1: calendered aramid paper containing mica particles; - type 2: uncalendered aramid paper containing mica particles. Materials which conform to this specification meet established levels of performance. However, the selection of material by a user for a specific…

IEC 61786-1:2013 provides guidance for measuring instruments used to measure the field strength of quasi-static magnetic and electric fields that have a frequency content in the range 1 Hz to 100 kHz and with DC magnetic fields to evaluate the exposure levels of the human body to these fields. Sources of fields include devices that operate at power frequencies and produce power frequency and…

IEC 61587-5:2013 specifies seismic test requirements for chassis, subracks, and plug-in units as defined in the IEC 60297 and IEC 60917 series. It applies in whole or in part, only to the mechanical structures of chassis, subracks, and plug-in units for electronic equipment, according to the IEC 60297 and IEC 60917 series, and does not apply to electronic components, equipment or systems within…

ISO/ASTM 52628:2013 describes the basic requirements that apply when making absorbed dose measurements in accordance with the ASTM E61 series of dosimetry standards. In addition, it provides guidance on the selection of dosimetry systems and directs the user to other standards that provide specific information on individual dosimetry systems, calibration methods, uncertainty estimation and…

ISO/ASTM 52701:2013 provides guidance on determining the performance characteristics of dosimeters and dosimetry systems used in radiation processing. ISO/ASTM 52701:2013 describes the influence quantities that might affect the performance of dosimeters and dosimetry systems and that should be considered during dosimeter/dosimetry system characterization. Users of ISO/ASTM 52701:2013 are directed…

ISO 19157:2013 establishes the principles for describing the quality of geographic data. It - defines components for describing data quality; - specifies components and content structure of a register for data quality measures; - describes general procedures for evaluating the quality of geographic data; - establishes principles for reporting data quality. ISO 19157:2013 also defines a…