Rechercher

1.1 This Standard applies to electrically-powered door opening devices and other opening and closing appliances rated at 600 V or less and intended to be used in nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 This Standard gives requirements for complete doors, gates, and other such assemblies that include electrically-powered opening and…

1.1 This Standard applies to single- and multiple-conductor fire alarm and signal cables with a maximum nominal voltage rating of 300 V and a minimum temperature rating of 60 °C for use in buildings and other structures in dry or damp locations in accordance with the Rules of Sections 16 and 32 of the Canadian Electrical Code, Part I. 1.2 Because other CSA Group Standards specify…

1 Scope 1.1 This Standard applies to concrete block masonry units made from cementitious materials, water, and aggregates, with or without the inclusion of other materials. This Standard may be applied to other units of similar manufacture and size within the limitations of the Standard. Note: For concrete brick masonry units, see CSA A165.2. For prefaced concrete masonry units, see CSA A165…

1.1 This Standard provides minimum requirements for shop fabricated single-wall or double-wall oil-water separators intended to collect and separate free oil from water by gravity separation at an inlet free oil concentration not exceeding 2 000 mg/L. 1.2 These oil-water separators are also installed for the capture and retention of oil spills under dry weather conditions up to the free oil…

1.1 General This Standard specifies performance requirements for thermostat models intended for line-voltage (120 to 240 V) switching of a controlled resistive heating load. The models covered by this Standard are as follows: a) wall-mounted line-voltage thermostats used with baseboards, panel convectors, fan-forced heaters or radiant floors; b) built-in line-voltage thermostats (up to 1500…

IEC 60705:2010+A1:2014 applies to microwave ovens for household use. It also applies to combination microwave ovens. This standard defines the main performance characteristics of household microwave ovens which are of interest to the user, and it specifies methods for measuring these characteristics. This fourth edition cancels and replaces the third edition published in 1999, its amendment 1 (…

ISO 17810:2014 defines CDMA spread spectrum modulation schemes in terms of: a) the services provided to the users of this specification; b) spreading code formats; and c) the procedures performed to generate and process the code formats. It does not specify: a) individual implementations or products; b) the methods or technologies required to perform the procedures; or c) the management…

ISO 17325-1:2014 specifies the basic design requirements, general function, designations and marking of oil booms. It further specifies minimum information regarding design, dimensions and materials of oil booms to be provided by the manufacturer. The intent of ISO 17325-1:2014 is to assist manufacturers and facilitate user selection of booms by technical criteria. It does not purport to address…

1.1 The requirements specified in this Standard cover light emitting diode (LED) equipment that is an integral part of a luminaire or other lighting equipment, and which operates in the visible light spectrum between 400 and 700 nm. These requirements also cover the component parts of LED equipment, including LED controlgear, controllers, arrays, modules, and packages, as defined in this Standard…

This National Standard of Canada is based on International Standard ISO 16602:2007+A1:2012, MOD. This International Standard establishes minimum performance classification and labelling requirements for protective clothing designed to provide protection against chemicals. Protective clothing items covered by this International Standard include, but may not be limited to, totally…