Rechercher

1.1 This Standard applies to the lines and equipment associated with underground electric supply and communication systems located entirely outside buildings and fenced supply stations. This Standard, which forms part of the Canadian Electrical Code, Part III, covers the requirements for construction of underground systems and includes electric supply and communication circuits that are…

1.1 This Standard applies to fans and ventilation equipment that is a) cord-connected, rated at not more than 250 V; b) permanently-connected to supply circuits of 600 V and less, single-phase or three-phase; c) used in non-hazardous locations; d) used in household, commercial, agricultural, or industrial locations; e) used indoors or outdoors; and f) used in accordance with the…

1.1 This Standard applies to motor-operated gardening appliances* intended for use on nominal system voltages of 250 V and less and in nonhazardous locations, and designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I. *For convenience, the short terms "appliance", "equipment", and "machine" are used herein. 1.2 This Standard…

1.1 This Model Code applies to the safety of medical electrical equipment (MEE) and medical electrical systems (MES) as it pertains to safety from electrical shock and fire and mechanical hazards. It provides construction, marking, and test requirements for the field evaluation of MEE and MES by a field evaluation body accredited by the SCC and/or recognized by the regulatory authority.…

1.1 This Standard specifies requirements for measuring the heat recovery efficiency and pressure loss for vertically installed, falling-film drain water heat recovery (DWHR) units. 1.2 This Standard applies to DWHR units a) of any diameter and length; and b) with a configuration where potable water and drain water flow rate is equal; 1.3 In this Standard, “shall” is used to express a…

1 Scope 1.1 This Standard specifies requirements for the durability and safety of vertically installed, falling-film drain water heat recovery (DWHR) units. 1.2 This Standard applies to DWHR units of any diameter and length and configuration for use with potable water, and to their components and materials supplied by the manufacturer, their assembly and installation instructions, and…

1 Scope This standard applies to two types of diesel fuel, Type A, Bx and Type B, Bx, suitable for use in high-speed diesel engine powered equipment for on-road and off-road applications and in select equipment powered by medium speed diesel engines. Bx represents biodiesel fuel containing x percent by volume of biodiesel component in the range of 1.0 to 5. Type A, Bx is intended for use in…

1 Scope This standard applies to Type B, Bxx diesel fuel containing from 6% to 20% by volume of biodiesel. Fuel to this standard is intended for use in high-speed diesel powered equipment for on-road and off-road applications and in select equipment powered by medium-speed diesel engines. Users of fuel meeting this standard are advised to refer to the owner’s manual of their vehicle, engine or…

ISO/TR 17424:2015 surveys the status of Local Dynamic Map (LDM) regarding architecture, implementation, and standardization efforts. It summarizes the high level architectures of the most important implementations and compares it with the CEN/ETSI/ISO ITS-Station architecture. ISO/TR 17424:2015 derives out of the application needs the requirements for a global LDM concept in terms of…

ISO/IEC TR 12182 specifies the manner in which categorizations of IT systems and software are organized and expressed. It provides the framework for categorizations, and a guide for applying it. This allows any community to clarify their scope of the systems by using their own definition of categories. The scope of application of the framework is intended to IT systems and software, including…