Rechercher

1.1 This Standard applies to gas convenience outlets (see Clause 3, Definitions), hereinafter referred to as gas outlets and optional enclosures, not to exceed 1-1/2 in (38.1 mm) and pressures not to exceed 5 psi (34.5 kPa), capable of operation at temperatures between 32°F and 200°F (0°C and 93.3°C) if intended for indoor use only, or between -20°F and 200°F (-28.8°C and 93.3°C) if intended…

1.1 This Standard applies to cord-connected equipment rated 250 V and less, single phase, to be operated from branch circuits fused at not more than 30 amperes and intended for use indoors, in ordinary locations in accordance with the Canadian Electrical Code, Part I. 1.2 This Standard applies to equipment designed to remove water from the air in a room in which it operates, by condensing water…

1.1 This Standard applies to voltage and polarity testers for use in nonhazardous locations, in accordance with the Rules of the Canadian Electrical Code, Part I, on electrical supply circuits and equipment at points where the voltage difference does not exceed 750 V. 1.2 This Standard does not apply to devices primarily intended to measure voltage, such as those that employ a meter…

1.1 This Standard covers three-phase, alternating current, salient pole synchronous machines 150 kW and up, 200 through 13,800 volts, 60 and 50 Hertz and will assist in verifying the machine efficiency has been maintained. Note: This Standard can be useful and applied with discretion to products outside the scope of this Standard. 1.2 Large 2-pole and 4-pole solid cylindrical rotor machines,…

1.1 This Standard specifies requirements for the design, construction, initial inspection and testing, marking, periodic inspection and testing, and repair of UN pressure receptacles and multiple-element gas containers (MEGCs) for the transport of dangerous goods. Annex A specifies the regulatory requirements for the conformity assessment system and registration requirements for manufacturers…

ISO 18383:2015 identifies a set of features that describes digital still cameras (DSCs), and it specifies their definitions, measurement methods, and presentation methods. This International Standard applies to DSCs designed and produced for and promoted to general consumers and need not be applied to those DSCs designed and produced to meet individual and special specifications agreed upon by…

ISO 16779:2015 specifies methods for the determination and verification of the shelf life of foodstuffs by means of sensory tests. Sensory characteristics to be evaluated are changes in appearance, odour, flavour, taste, trigeminal sensation, and texture during assumed preservation periods. It is intended to support the development of individual approaches. ISO 16779:2015 does not purport to…

ISO 16075-1:2015 contains guidelines for the development and the execution of projects intending to use treated wastewater (TWW) for irrigation and considers the parameters of climate and soil. The purpose of these guidelines is to provide specifications for all elements of a project using TWW for irrigation, including design, materials, construction, and performance, when used for the following…

ISO/IEC TR 29196:2015 consolidates information relating to successful, secure and usable implementation of biometric enrolment processes, while indicating areas of uncertainty that organisations proposing to use biometric technologies will need to address during procurement, design, deployment and operation. Much of the information is generic to many types of application e.g. from national scale…

ISO/IEC TR 29196:2015 consolidates information relating to successful, secure and usable implementation of biometric enrolment processes, while indicating areas of uncertainty that organisations proposing to use biometric technologies will need to address during procurement, design, deployment and operation. Much of the information is generic to many types of application e.g. from national scale…