Rechercher

This International Standard specifies minimum requirements for concentrates used for haemodialysis and related therapies. For the purpose of this International Standard, “concentrates” are a mixture of chemicals and water, or chemicals in the form of dry powder or other highly concentrated media, that are delivered to the end user to make dialysis fluid used to perform haemodialysis and…

1.1 This Standard specifies requirements for polyethylene of raised temperature (PE-RT) tubing systems that are comprised of tubing and fittings. Tubing covered by this Standard is made in Standard Dimensional Ratio 9 (SDR 9). Systems are pressure rated at two temperatures: 1105 kPa at 23 °C and 690 kPa at 82 °C. Systems are intended for use in potable water distribution systems or other…

1.1 This Standard specifies a) energy performance requirements for factory-made, self-contained, electrically-operated, mechanically-refrigerated household dehumidifiers with daily water-removal capacities of up to 87.5 L (185 U.S. pints); b) test procedures for measuring capacity, standby power, off mode power, and active mode energy use; and c) minimum and high efficiency energy factor, EF. 1.2…

1.1 This Standard applies to cord-connected microwave ovens intended for use on nominal 120/240 V branch circuits and microwave ovens intended for permanent connection to branch circuits up to 240 V, manufactured for use in homes and similar locations 1.2 This Standard specifies methods of testing the energy consumption in both active and standby modes of electrically operated microwave…

1.1 This Standard specifies methods for measuring the volume, energy consumption, and total display area (TDA) of electrically operated commercial refrigeration equipment. 1.2 This Standard applies to commercial refrigerator, refrigerator-freezer, and freezer cabinets and merchandisers that are intended for displaying, storing, or holding food products including canned and bottled beverages…

1.1 This Standard a) provides a consistent approach across the industry to produce specifications for components used in normal operation, anticipated operational occurrences (AOOs), and design basis accidents (DBAs). This Standard may be used to produce specifications for components used in design extension conditions (DECs); b) provides a common set of attributes to be used when…

1.1 This Standard defines requirements for the process of qualification of digital hardware and software for use in instrumentation and control applications for NPPs. Notes: 1) This Standard applies to individual safety-related programmable digital devices containing software or programmable logic (e.g., devices such as application-specific integrated circuit (ASICs), complex programmable…

1.1 This Standard applies to manual lever operated, pressure lubricated, straight way gas shut-off valves, sizes NPS ¼ inch to 8 inch, of metallic construction with welded, or flanged, or threaded ends, for use with natural gas, manufactured gas, and liquefied petroleum gases (distributed as vapour with or without the admixture of air), or mixtures thereof that are suitable for use between…

IEC TR 61968-900:2015(E) is a companion document to the official standard IEC 61968-9. It is written from the viewpoint of a software developer or systems integrator who is tasked with implementing IEC 61968-9. It is not intended as a complete description of this standard. For full details, please refer to IEC 61968-9. This technical report contains informative recommendations which may be used…

ISO 18541-4:2015 specifies a conformance test for a vehicle manufacturer assessment of self-conformance of the VM RMI system. The conformance test cases follow the use case definition of ISO 18541‑1 and the requirements stated in ISO 18541‑2 and ISO 18541‑3. The primary but not exclusive purpose of this part of ISO 18541 is to provide information to the VM RMI system provider to build and test…