Rechercher

This document provides an overview of technologies that are under development to capture carbon dioxide (CO2) that is generated during cement manufacture. This document is intended to inform users about the different technologies, including the characteristics, the maturity and the boundaries of these technologies. This document is applicable to organizations involved in the cement industry and…

The document specifies test conditions for determining the seasonal performance characteristics of air source heat pump water heaters for space heating with electrically driven compressors with or without supplementary heater. The purpose of this document is to rate performance of the heat pump water heaters for space heating with no operation of any supplementary heater. In the case of heat pump…

IEC 61760-3:2021 gives a reference set of requirements, process conditions and related test conditions to be used when compiling specifications of electronic components that are intended for usage in through-hole reflow soldering technology. The object of this document is to ensure that components with leads intended for through-hole reflow and surface mounting components can be subjected to the…

1 Scope 1.1 This Standard applies to newly-produced torches for use with propane, butane, natural gas, and MPS (methyl acetylene-propadiene stabilized). This Standard applies to torches that aspirate atmospheric air for combustion. 1.2 This Standard applies to hand-held torches intended for industrial applications such as brazing, soldering, pre-heating for welding, heat treatment, and…

1 Scope 1.1 This Standard applies to manual lever operated, gas shut-off valves sizes NPS 1/4 to 8 of metallic construction with weld and flanged and threaded ends other than pressure lubricated designs for use with natural gas, manufactured gas, and liquefied petroleum gases. Notes: 1) Valves covered by this Standard may be used on “digester gas” (methane produced during sewage treatment…

1 Scope 1.1 General The test method in this Standard determines the wind resistance of vegetated roof assembly when subjected to dynamic wind flow and dynamic wind uplift in laboratory conditions. 1.2 Applicability Testing in accordance with the test method in this Standard is applicable to modular and built-in-place vegetated roof systems. 1.3 Exceptions Testing in accordance with the test…

1 Scope 1.1 Mitigation strategies and other actions This Standard covers the following strategies to maintain permafrost or mitigate permafrost degradation related to existing buildings or structures: a) site techniques that consist of i) site grading and drainage; ii) snow management; and iii) shading or albedo change. b) foundation techniques that consist of i) ventilation; ii)…

1 Scope 1.1 General This Standard specifies criteria for establishing a security management program for petroleum and natural gas industry systems to ensure security threats and associated risks are identified and managed. This Standard provides mitigation and response processes and procedures to prevent and minimize the impact of security incidents that could adversely affect people, the…

1 Scope This document — specifies GESRs for lifts (elevators), their components and functions, and — establishes a system and provides methods for minimizing safety risks that can arise in the course of, the operation and use of, or work on, lifts (elevators). NOTE 1 Hereinafter, the term “lift” is used instead of the term “elevator”. NOTE 2 See Clause 5 regarding the use and application of…

1. SCOPE 1.1 This Voluntary Product St1.andard primarily establishes structural criteria for assessing the acceptability of wood structural panels for construction sheathing and single floor applications and provides a basis for common understanding among the producers, distributors, and the users of these products. The standard does not address non-structural issues such as resistance to…