Petroleum and related products — Determination of anti-aging for phosphate ester turbine control flu...
This document describes a procedure determination of the anti-aging aspects of turbine control fluids used in the turbine speed control system of power generation enterprises.
This test method applies to triaryl phosphate ester turbine control fluids as well as fire-resistant liquids. The anti-aging test of other ester oils can be carried out by this document but precision thereof has not been…
Systèmes de distribution de gaz médicaux — Partie 1: Systèmes de distribution de gaz médicaux compri...
ISO 7396-1:2016 spécifie les exigences relatives à la conception, à l'installation, au fonctionnement, aux performances, aux essais, à la réception et à la documentation des systèmes de distribution utilisés dans les établissements de soins pour les gaz suivants:
- l'oxygène;
- le protoxyde d'azote;
- l'air médical;
- le dioxyde de carbone;
- les mélanges d'oxygène et de…
Lasers and laser-related equipment — Determination of laser resistance of tracheal tube shaft and tr...
This document specifies a method of testing the continuous wave (cw) laser resistance of the shaft of a tracheal tube and the cuff regions including the inflation system of tracheal tubes designed to resist ignition by a laser.
NOTE 1 When interpreting these results, the attention of the user is drawn to the fact that the direct applicability of the results of this test method to the clinical…
Non-destructive testing — Characteristics of focal spots in industrial X-ray systems — Part 3: Measu...
This document specifies a method for the measurement of focal spot dimensions within the range of 5 µm to 300 µm of X-ray systems up to and including 225 kV tube voltage. This determination is based on the evaluation of an image with a dedicated focal spot that has been radiographically recorded using an edge and evaluated with a digital method.
The imaging quality and the resolution of X-ray…
Medical electrical equipment — Part 2-30: Particular requirements for basic safety and essential per...
IEC 80601-2-30:2018 applies to the basic safety and essential performance of automated sphygmomanometers, hereafter referred to as ME equipment, which by means of an inflatable cuff, are used for non continuous indirect estimation of the blood pressure without arterial puncture. This document specifies requirements for the basic safety and essential performance for this ME equipment and its…
Appareils électromédicaux — Partie 2-30: Exigences particulières de sécurité de base et de performan...
L’IEC 80601-2-30:2018 s'applique à la sécurité de base et aux performances essentielles des sphygmomanomètres automatiques, ci-après dénommés appareils EM, qui, au moyen d'un brassard gonflable, sont utilisés pour l'estimation indirecte non continue de la pression artérielle sans ponction artérielle. Le présent document spécifie les exigences pour la sécurité de base et…
Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 2: Det...
ISO 14505-2:2006 provides guidelines for the assessment of the thermal conditions inside a vehicle compartment. It can also be applied to other confined spaces with asymmetric climatic conditions. It is primarily intended for assessment of thermal conditions, when deviations from thermal neutrality are relatively small. Appropriate methodology as given in ISO 14505-2:2006 can be chosen for…
Air filters for general ventilation — Part 1: Technical specifications, requirements and classificat...
ISO 16890-1:2016 establishes an efficiency classification system of air filters for general ventilation based upon particulate matter (PM). It also provides an overview of the test procedures, and specifies general requirements for assessing and marking the filters, as well as for documenting the test results. It is intended for use in conjunction with ISO 16890‑2, ISO 16890‑3 and ISO 16890‑4.…
