Rechercher

ISO 9631:2003 specifies requirements for materials used in vulcanized-rubber seals for hot potable and non-potable water supply (up to 110 °C). The different seal designations specified are defined according to seal type, seal application and the requirements for a particular seal. General requirements for finished joint seals are also given. Any additional requirements called for by the…

ISO/IEC 23290:2002 specifies functions for using an H.323 packet network in order to interconnect two Private Integrated services Network eXchanges (PINXs) forming part of a Private Integrated Services Network (PISN). Interconnection is achieved by carrying the inter-PINX signalling protocol over the H.323 call signalling channel, making use of the protocol tunnelling facilities of H.323, and…

ISO/IEC 23290:2002 specifies functions for using an H.323 packet network in order to interconnect two Private Integrated services Network eXchanges (PINXs) forming part of a Private Integrated Services Network (PISN). Interconnection is achieved by carrying the inter-PINX signalling protocol over the H.323 call signalling channel, making use of the protocol tunnelling facilities of H.323, and…

ISO/TS 14904:2002 specifies the interfaces for clearing between operators and gives a framework of the common message structure and data elements to be used on the interfaces. Its objective is to make the transfer of payment and Electronic Fee Collection (EFC) related data possible both between different payment systems and between different operators such as collection agents, clearing operators…

1. Scope This Standard can be applied to any defined forest area (DFA). The boxed text prescribes the specific SFM requirements for public participation, performance, and systems. The text located outside the boxes is intended to clarify the specifications set out in the boxes by providing in-depth explanations and practical examples. It does not establish any requirements in addition to those…

This International Standard specifies requirements for materials used in vulcanized rubber seals for cold drinking-water supplies (up to 50 °C); drainage, sewerage and rainwater systems (continuous flow up to 45 °C and intermittent flow up to 95 °C). The different designations of seals specified are defined according to their type, application and requirements. General requirements for finished…

This International Standard specifies signalling interworking between "QSIG" and "H.323" in support of generic functional procedures for supplementary services within a Corporate telecommunication Network (CN). "QSIG" is a signalling protocol that operates at the Q reference point between Private Integrated Services eXchanges (PINX) within a Private Integrated…

This International Standard specifies signalling interworking between "QSIG" and "H.323" in support of generic functional procedures for supplementary services within a Corporate telecommunication Network (CN). "QSIG" is a signalling protocol that operates at the Q reference point between Private Integrated Services eXchanges (PINX) within a Private Integrated…

1. Introduction CSA Standard B619 (referred to from this point forward as #the standard# or #B619#) was developed to address the unique requirements of the trucking industry. It was designed to provide assurances to stakeholders (such as insurance companies and federal and provincial regulators) that the carrier is committed to complying with all transportation safety requirements. The…

The EDA Standards Roadmap Workshop was sponsored by the CAD Framework Initiative (CFI), Electronic Design Automation Companies (EDAC), and SEMATECH with participation by interested industry groups. The Workshop was specifically aimed at developing an industry-wide roadmap for development of design and test standards within Electronic Design Automation (EDA). There were three working groups, each…