Rechercher

1. SCOPE 1.1 This standard applies to flat sheets composed of a uniform mixture of Portland cement and asbestos fibre, with or without the addition of curing agents, pigments, coatings, mineral granules or mineral fillers, intended for industrial, commercial and general building purposes. 1.2 For cautionary notes on the use of this product, see par. 3.3 and 7.3. 1.3 This standard…

Applicable to the inspection of tubes with an outside diameter greater than or equal to 9 mm. Specifies general requirements, method of test, reference standards, reference notches, equipment calibration and checking, acceptance and test report. Annex A gives notes on limitations of the magnetic transducer/flux leakage technique.

This National Standard of Canada is equivalent to International Standards ISO 8879-1986 and ISO 9069-1988. 1 Scope This International Standard: (a) Specifies an abstract syntax known as the Standard Generalized Markup Language (SGML). The language expresses the description of a document's structure and other attributes, as well as other information that makes the markup…

Is applicable to the inspection of tubes with an outside diameter greater than or equal to 4 mm and includes two different acceptance levels. Specifies general requirements, method of test, reference standards, reference notch, equipment calibration and checking, acceptance and test report. Annex A contains notes on limitations of the eddy current test method.

Applicable to the inspection of tubes with an outside diameter greater than or equal to 9 mm. Specifies general requirements, method of test, reference standards, reference notches, equipment calibration and checking, acceptance and test report. Annex A gives notes on limitations of the magnetic transducer/flux leakage technique.

1. Scope 1.1 This Standard applies to heat tracing cables, heat tracing cable sets, and their related components that are intended (a) to provide supplemental heat to maintain or raise the temperature of a pipe, vessel, instrument, or related equipment; (b) for permanent installation in Class I, Groups A, B, C, and D, Divisions 1 and 2; Class II, Groups E, F, and G, Divisions 1 and…

This National Standard of Canada is equivalent to International Standard ISO 7176/1-1986. 1. Scope 1.1 The purpose of this Standard is to provide guidance to assist clinicians and wheelchair users in interpreting the increased information that will appear in manufacturers' literature as a result of testing in compliance with this Standard. Stability requirements vary…

This National Standard of Canada is equivalent to International Standard ISO 7176-3:1988. 1. Scope 1.1 The purpose of this Standard is to provide guidance to assist clinicians and wheelchair users in interpreting the increased information that will appear in manufacturers' literature as a result of testing in compliance with this Standard. 1.2 This Standard specifies methods…

This National Standard of Canada is equivalent to International Standard ISO 7176-6:1988. 1. Scope 1.1 The purpose of this Standard is to provide guidance to assist clinicians and wheelchair users in interpreting the increased information that will appear in manufacturers' literature as a result of testing in compliance with this Standard. Although many of the newer wheelchair…

This National Standard of Canada is equivalent to International Standard ISO 7176-10:1988. 1. Scope 1.1 The purpose of this Standard is to provide guidance to assist clinicians and wheelchair users in interpreting the increased information that will appear in manufacturers' literature as a result of testing in compliance with this Standard. This Standard provides useful…