Rechercher

This standard is divided into five sections, each dealing with a specific example of standardized fuse for use by authorized persons: Section I: Fuses with fuse-links with blade contacts. Section II: Fuses with fuse-links for bolted connections. Section III: Fuses with fuse-links having cylindrical contact caps. Section IV: Fuses with fuse-links with offset blade contacts. Section V: Fuses…

This Technical Report presents the framework and recommended model for internationalization and identifies the Services required for the internationalization of information technology. This Technical Report: - discusses the requirements of internationalized Systems and their users, - suggests a concerted, unified approach to internationalization, - recommends Services to fulfil the requirements…

This Technical Report presents the framework and recommended model for internationalization and identifies the Services required for the internationalization of information technology. This Technical Report: - discusses the requirements of internationalized Systems and their users, - suggests a concerted, unified approach to internationalization, - recommends Services to fulfil the requirements…

1. Scope 1.1 General This Standard covers seamless, continuous welded, electric welded (flash welded pipe and low frequency electric welded pipe excluded), and submerged arc welded pipe primarily intended for use in oil or gas pipeline systems. Notes: (1) Flash welded pipe is pipe manufactured by a process combining electric resistance heating to produce a simultaneous coalescence…

This National Standard of Canada is based on International Standards CEI/IEC 598-2-17:1984 (first edition, 1984), including Amendment 1:1997 and 2:2000. 17.1 Scope This Standard specifies requirements for stage, television, film and photographic studio luminaires (including spot and floodlighting projectors) for use, outdoors and indoors, with tungsten filament, tubular fluorescent, and…

This National Standard of Canada is based on International Standard IEC 922:1989, Including A1-1990 and A2-1992. 1. Scope This standard specifies safety requirements for ballasts for discharge lamps such as high-pressure mercury vapour, low- pressure sodium vapour, high-pressure sodium vapour and metal halide lamps. Section One specifies general requirements and Section Two specifies…

This National Standard of Canada is based on International Standard IEC 928:1995. 1. Scope This standard specifies general and safety requirements for electronic ballasts for use on a.c. supplies up to 1000 V at 50 Hz or 60 Hz with operating frequencies deviating from the supply frequency, associated with tubular fluorescent lamps as specified in IEC 81 and other tubular fluorescent lamps for…

This National Standard of Canada is equivalent to International Standard ISO 11134:1994. 1 Scope This International Standard specifies requirements for the use of moist heat in sterilization process development, validation of the sterilization process and control of routine sterilization. It covers all moist heat proceses, including saturated steam and air-steam mixtures, and applies to all…

This National Standard of Canada is based on International Standard CEI/IEC 598-2-2:1996 (second edition, 1996-05), including Amendment 1:1997. 2.1 Scope This section of IEC 598 specifies requirements for recessed luminaires for use with tugsten filament, tubular fluorescent and other discharge lamps to be installed and used on branch circuits not exceeding 750 V and used in accordance…

1. Scope 1.1 This Standard applies to (a) all windows covered by CSA Standard A440, including (i) vertical sliding windows; (ii) horizontal sliding windows; (iii) tilt-and-turn windows; (iv) casement windows, both fixed and operable; (v) projecting (awning/hopper) windows; and (vi) fixed windows, including fixed-window sidelights and transom windows; (b) sliding glass doors covered…